You are browsing camaro5 
 |
|
04-04-2017, 08:52 PM
|
#1 |
|
BUMBL Z
|
Inferno seat cover part numbers
Anyone got them? Or a good condition set for sale? My stock black ones are shot.
Sent from my Pixel XL using Tapatalk
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq  |
|
|
|
04-04-2017, 09:35 PM
|
#2 |
         
Drives: 2020 GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,278
|
Each leather panel is roughly about $200-$250 new from GM except the back seat pieces which are a little cheaper per piece at like $140-$180 I believe. Prices are similar no matter the color.
__________________
2023 Camaro 2SS 1LE Summit White
1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 5000 - 5/30/2023 6000 - 6/03/2023 2020 GMC Sierra AT4 6.2L Black |
|
|
|
|
04-04-2017, 10:24 PM
|
#3 |
|
BUMBL Z
|
Need part numbers to order them, know where I could find them by any chance?
Edit: found them. Passenger back cover: 22795674 Passenger headrest cover (same as driver): 23279131 Passenger lower seat cover: 92246874 Driver back: 22795656 Driver headrest: 23279131 Driver lower: 92246888 SS Inferno Headrest part number: 92246225 They are a good bit more expensive than your post at gmpartsdirect, but can probably be found for cheaper. Also, for future reference, gmpartsdirect.com has some killer references for part numbers, they have the full diagrams over there. Just found that out now lol
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq Last edited by spadz93; 04-06-2017 at 11:41 AM. |
|
|
|
|
04-05-2017, 06:16 PM
|
#4 |
|
Drives: 2020 GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,278
|
I knew they were expensive as anything considering what your getting per $280 here and there. Price wise they are all going to be about the same because you have to add in shipping especially with GM Parts Direct. They're liable to charge $50-$75 in shipping alone per piece. I know they used to do that a lot I'm not sure about today.
__________________
2023 Camaro 2SS 1LE Summit White
1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 5000 - 5/30/2023 6000 - 6/03/2023 2020 GMC Sierra AT4 6.2L Black |
|
|
|
|
04-06-2017, 11:42 AM
|
#5 | |
|
BUMBL Z
|
Quote:
Also, my second post has been updated with the part number for the inferno headrests with the SS Stitching
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|
|
|
|
|
 |
|
|
