Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 12-04-2013, 04:38 AM   #1
StanTheMan
 
Drives: 2014 Camaro 2SS
Join Date: Oct 2013
Location: EU
Posts: 105
Loudest exhaust system?

Hi gents,

Just wanted to ask you guys what's the loudest exhaust for the Camaro. I live in the EU (Bulgaria) and there aren't really any norms about how loud your exhaust can be or stuff like that, so you can pretty much put anything. Now I don't want some racing type of exhausts, just something that will make my soon-to-arrive 2014 sound mean
StanTheMan is offline   Reply With Quote
Old 12-04-2013, 07:35 AM   #2
NOLA_1LE
 
NOLA_1LE's Avatar
 
Drives: 2013 Camaro 1LE
Join Date: Aug 2013
Location: Fort Worth
Posts: 90
My Borla LT's and ATAK w/ no cats sounds great!
__________________
2013 1LE Inferno Orange 848hp 836tq
TSP Forged 376ci motor w/ 1/2" Head Studs and PRC 260cc heads, F1-R Procharger Cog Drive w/ Race Intercooler, Fore Fuel System, ID1000's, Alky Meth Kit, Mantic 9000, Borla LT and CAT back ATAK
Pfadt: Lowering Springs, Rear Trailing Arms and Tie Rods, Rear Drag Sway Bar, Rear Upper and Lower Control Arm Bushings, Solid Sub Frame Bushings, Front Spherical Trailing Arm Bushings, Front Lower Control Arm Bushings
Barton Short Throw Shifter, AEM Boost and Wideband Gauges w/ A Pillar Pod, VIS CF Terminator Hood, and ZL1 CF spoiler
NOLA_1LE is offline   Reply With Quote
Old 12-04-2013, 07:59 AM   #3
amerimuscle
 
Drives: 2011 Camaro 1SS
Join Date: Dec 2011
Location: Cleveland Ohio
Posts: 414
+1 ^^^^^ i had the ATAK system on stock manifolds and it was loud as EF, so i can only imagine headers + ATAK ..... thatd be nasty!! the rear section / cat back has to be the ATAK...no cats and pick whatever (quality) header youd like
amerimuscle is offline   Reply With Quote
Old 12-04-2013, 08:03 AM   #4
amerimuscle
 
Drives: 2011 Camaro 1SS
Join Date: Dec 2011
Location: Cleveland Ohio
Posts: 414
........and it wouldnt be complete without a JRE rough idle cam
amerimuscle is offline   Reply With Quote
Old 12-04-2013, 08:17 AM   #5
timker
 
timker's Avatar
 
Drives: Camaro SS bumblebee edition
Join Date: Oct 2013
Location: Laguna Beach
Posts: 8
My magnaflow exhaust on a cold start

__________________

Instagram: timbarrinuevo

timker is offline   Reply With Quote
Old 12-04-2013, 08:44 AM   #6
StanTheMan
 
Drives: 2014 Camaro 2SS
Join Date: Oct 2013
Location: EU
Posts: 105
I forgot to mention that I'd like to save my warranty lol so headers are out of the question
StanTheMan is offline   Reply With Quote
Old 12-04-2013, 09:25 AM   #7
djpelosi

 
djpelosi's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Aug 2012
Location: Cordova, TN
Posts: 774
Muffler and resonator delete gets pretty loud, but it's raspy. If you don't like that sound, take out the muffler/resonator and add either SLP LoudMouth 1 or Spintech. Both are pretty loud and sound great.
djpelosi is offline   Reply With Quote
Old 12-04-2013, 09:41 AM   #8
BigNate
 
BigNate's Avatar
 
Drives: 2010 Camaro 2SS/RS Supercharged
Join Date: Nov 2013
Location: Hattiesburg, MS
Posts: 59
Here is my Corsa Exhaust, cold start. I do have headers, but it would still sound good without the headers. When you drive normal, the exhaust is quiet almost like it is not even there. But it gets loud when you put your foot in it. It is the best of both worlds, quiet and loud. It is really loud on cold starts and not as loud on when it warms up. No drone! None!

__________________
2010 2SS/RS Magnuson Supercharged, Headers, Corsa Exhaust, CAI
BigNate is offline   Reply With Quote
Old 12-04-2013, 10:24 AM   #9
nyrfan
Let's go Rangers!
 
nyrfan's Avatar
 
Drives: 13' AGM 2SS/RS L99
Join Date: Jun 2011
Location: Orlando, FL
Posts: 10,742
Check out my Corsa videos.

http://www.camaro5.com/forums/showthread.php?t=306272
__________________
Soprano 4/1/00-6/14/11, Gone but NEVER forgotten!
FSP tuned: 377/389
nyrfan is offline   Reply With Quote
Old 12-04-2013, 10:31 AM   #10
JDP Sales
 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
I'd say one of the Magnaflow comp series. They even offer a center exit that has no mufflers or resonators if you really want loud.

Best regards,

Tyler
888-308-6007
JDP Sales is offline   Reply With Quote
Old 12-04-2013, 11:25 AM   #11
1 BADD 1LE
Black Widow
 
1 BADD 1LE's Avatar
 
Drives: 2014 Camaro 427SS
Join Date: Nov 2013
Location: Lafayette, LA
Posts: 178
What's the loudest? Easy = Whipple 2.9L Supercharger, Night Fury Cam, Heads, Meth Injection, CAI, 1 7/8" SW Long Tube Headers, X-Pipe, Cats Deleted, Resonators Deleted, Mufflers Deleted...mine is WAY too loud - currently looking at options for mufflers as we speak!!!
1 BADD 1LE is offline   Reply With Quote
Old 12-04-2013, 12:00 PM   #12
Caswell239

 
Caswell239's Avatar
 
Drives: 2011 2ss/rs
Join Date: Nov 2011
Location: Canada
Posts: 1,431
Quote:
Originally Posted by 1 BADD 1LE View Post
What's the loudest? Easy = Whipple 2.9L Supercharger, Night Fury Cam, Heads, Meth Injection, CAI, 1 7/8" SW Long Tube Headers, X-Pipe, Cats Deleted, Resonators Deleted, Mufflers Deleted...mine is WAY too loud - currently looking at options for mufflers as we speak!!!
Lol I have the 2.9 whipple, jre rough idle cam, 1-7/8 long tubes with 3 inch xpipe cats deleted to 3 inch muffler from kooks. It's pretty f'in loud. I love how it sounds getting on it and at idle but it is loud! The kooks mufflers are just tiny. But I love it!
Caswell239 is offline   Reply With Quote
Old 12-04-2013, 01:09 PM   #13
slick rick
SoCal Mayhem
 
slick rick's Avatar
 
Drives: 2010 Camaro 1SS/RS
Join Date: Aug 2008
Location: Foothill Ranch, CA
Posts: 5,488
cut outs
__________________
slick rick is offline   Reply With Quote
Old 12-05-2013, 10:52 PM   #14
Bell040


 
Bell040's Avatar
 
Drives: 2SS/RS - Black - GFX
Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
Quote:
Originally Posted by slick rick View Post
cut outs
^ ding ding
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691)
Recieved: 6-12-09

Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods.
Bell040 is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:39 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.