1LE shafts and hubs ordered - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nak3dsnake · 11-19-2012, 04:23 PM

Quote:

Originally Posted by blazzin1

I believe you, I just want to find out why there are two different part numbers!?!?!? And if dekan ordered the other part number, did he order and/or receive the wrong hubs? Can you show the sheet you were looking at, does it specify 1LE? Just curious man, not trying to "call you out" or anything!!!

They're at home. The sheet shows it as the ZL1 hub. What they might have done is assigned different part numbers for the 1LE parts. They did the same for the rear shock mounts and they came out much cheaper than the ZL1 rear mounts. It makes be wonder if that's the case, are they the same or different?

blazzin1 · 11-19-2012, 04:28 PM

Quote:

Originally Posted by nak3dsnake

It makes be wonder if that's the case, are they the same or different?

That's the $1,000,000.00 Question!!!!

dekan513 · 11-20-2012, 10:20 AM

ill get my boxes and check and take pics. i just bought a measure gauge 40 bucks lol to accurately measure and they are about 6 mm bigger then the ss.
when i get the nuts in ill get pics of measurments. from what i could count the le1 are 32 or 33 spline count

dekan513 · 11-20-2012, 10:27 AM

i just walk out and got the boxes ,
part # r
axels
22806796
22806795

hubs
22924741

blazzin1 · 11-20-2012, 10:42 AM

Thanks dekan! Any idea what the part number is on those two axle nuts you had to order?

blazzin1 · 11-21-2012, 07:35 AM

Quote:

Originally Posted by nak3dsnake

They're at home. The sheet shows it as the ZL1 hub. What they might have done is assigned different part numbers for the 1LE parts. They did the same for the rear shock mounts and they came out much cheaper than the ZL1 rear mounts. It makes be wonder if that's the case, are they the same or different?

According to Maureen at Rodgers Chevrolet, the 25954415 is the same part as the 22924741, the 25954415 is just an "older" part number. Hmmm, older??? Maybe these hubs were used on something else besides the 1LE/ZL1 at one time, maybe a corvette somewhere down the line???? Just a thought. Anyway here are her prices:

22806795 LH Axle $184
22806796 RH Axle $184
22924741 Hubs $144 ea. (x2)
11611234 Axle Nuts $3 ea. (x2)
Total: $662 (shipped)

nak3dsnake · 11-21-2012, 07:37 AM

Quote:

Originally Posted by blazzin1

According to Maureen at Rodgers Chevrolet, the 25954415 is the same part as the 22924741, it's an "older" part number. Hmmm, older??? Maybe these hubs were used on something else besides the 1LE/ZL1, maybe corvette somewhere down the line???? Just a thought. Anyway here are her prices:

22806795 LH Axle $184
22806796 RH Axle $184
22924741 Hubs $144 ea. (x2)
11611234 Axle Nuts $3 ea. (x2)
Total: $662 (shipped)

You are correct on them being used on something else. The CTS and Camaro share wheel hubs. These are also used on the CTS-V.

blazzin1 · 11-21-2012, 07:44 AM

Quote:

Originally Posted by nak3dsnake

You are correct on them being used on something else. The CTS and Camaro share wheel hubs. These are also used on the CTS-V.

Ahhhhh, CTS-V....that explains it! Still not sure why they would need to change the part number at some point, but whatever..... I'm thinking that this is a pretty good deal for upgraded axles. But I'm still hesitating wondering if it would be better to wait for a "deal" on some used DSS Axles on the classifieds??? I think I've seen the older 1000hp axles going for $750-ish on there???? Oh well, maybe I'll just wait and think about it for a while.

dekan513 · 11-21-2012, 07:55 AM

i would wait and see how these ones hold up i got . they may work or may not.

i dont know the nut # buddy order them for me lol. he does all that stuff he owns a kyspeed so.

dekan513 · 11-21-2012, 07:56 AM

i waited for a while to find some used 1000 hp or 1400 hp axels for a while no good deals for used ones i thought. so i figured i would try these.

i wonder if they make a upgrade axel for the le1 hubs

Pro Stock John · 11-21-2012, 09:41 AM

Can we see a pic of a 1LE half shaft? My understanding is that the stock SS half shafts break where they taper inwards. I have a few sets of stock SS axles at the house I can take measurements too.

tramtwo · 11-21-2012, 09:49 AM

Quote:

Originally Posted by Pro Stock John

Can we see a pic of a 1LE half shaft? My understanding is that the stock SS half shafts break where they taper inwards. I have a few sets of stock SS axles at the house I can take measurements too.

Post #14 of this thread.

Pro Stock John · 11-21-2012, 09:54 PM

Cool thanks.

dekan513 · 11-26-2012, 10:33 AM

guys sorry i havnt been back, but i ordered phadt trailing arm and bushing so gonna do it all at once.

11-20-2012, 10:20 AM	#31
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	ill get my boxes and check and take pics. i just bought a measure gauge 40 bucks lol to accurately measure and they are about 6 mm bigger then the ss. when i get the nuts in ill get pics of measurments. from what i could count the le1 are 32 or 33 spline count __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-20-2012, 10:27 AM	#32
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	i just walk out and got the boxes , part # r axels 22806796 22806795 hubs 22924741 __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-21-2012, 07:55 AM	#37
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	i would wait and see how these ones hold up i got . they may work or may not. i dont know the nut # buddy order them for me lol. he does all that stuff he owns a kyspeed so. __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-21-2012, 07:56 AM	#38
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	i waited for a while to find some used 1000 hp or 1400 hp axels for a while no good deals for used ones i thought. so i figured i would try these. i wonder if they make a upgrade axel for the le1 hubs __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-21-2012, 09:41 AM	#39
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Can we see a pic of a 1LE half shaft? My understanding is that the stock SS half shafts break where they taper inwards. I have a few sets of stock SS axles at the house I can take measurements too. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

11-20-2012, 10:42 AM	#33
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Thanks dekan! Any idea what the part number is on those two axle nuts you had to order?

11-21-2012, 09:54 PM	#41
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Cool thanks. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

11-26-2012, 10:33 AM	#42
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	guys sorry i havnt been back, but i ordered phadt trailing arm and bushing so gonna do it all at once. __________________ check out ky speeds fb page https://www.facebook.com/kyspeed