09-21-2008, 08:33 PM | #1 |
Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008
Location: Central Point, OR
Posts: 5,688
|
Interior material/quality?
So now that the production model has been shown, some of you have seen; maybe even sat in it? How is the quality/fit of the interior? I'm sure the seats are great, but what I'm really curious about is the dash and the door panels... Are they like "fabric wrapped"? Soft, and plushie? Or are they just hard plastic, similar to that of... Say a former 07 Silverado Classic I used to have? I'm not a fan of the plastic door panels, or hard plastic dash
I have an 04 GTO, and the interior in that is great! I was starting to thing GM didn't have it in them to have an interior that was worth a crap anymore... I guess my point with this is, if the Camaro ends up with a poor quality, crappy plastic interior panels, I'll probably just keep my GTO instead. Maybe I'll just buy an LS3 crate engine and dump that in it |
09-21-2008, 08:36 PM | #2 |
Yes, that's my real name.
Drives: 2005 LS2 600hp GTO Join Date: Jul 2008
Location: Ventura, ca.
Posts: 770
|
first in.
__________________
Magnuson 112HH supercharger at 7.5 psi (Virtual 9.0 liter) 600hp 1 of 2 torrid/red int /A4/05 555r 275/40/R17's Nitto Extreme Drags 1.7 60 ft Car runs high 11's No other mods. I got the first 112HH Magnuson blower ported for a GTO. Now it appears it was also one of the last....
http://www.ribbonprinting.com http://www.personalizedawarenessribbons.com |
09-21-2008, 08:45 PM | #3 |
2G1FC1EV1A9110079
Drives: 2010 2LT/RS, 2013 2SS/RS 1LE Join Date: Jun 2008
Location: Arizona
Posts: 4,756
|
Everything looked and felt very nice, and expensive. But scott did say that the material wasnt final.
__________________
|
|
|
|
|