05-11-2015, 02:52 PM | #1 |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
**Noob quartermile time** What to expect?**
Like stated, Im totally new to dragracing. I am going to take my car this weekend to Summit raceway in Norwalk Ohio. I am wondering what kinda time I can expect. Considering I have never raced before, and don't have a clue what I am doing.
Mods are in sig. I am going to try to have my line lock installed before this friday, but not sure. What do you guys think I should run for a first timer with my power? Mickey Thompson 20inch DR's
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 Last edited by 1KillerSS; 05-11-2015 at 07:54 PM. |
05-11-2015, 06:09 PM | #2 |
Drives: 2010 2SS LS3, 2013 duramax Join Date: Nov 2012
Location: Dover, De
Posts: 1,451
|
I broke into the 10's my second time to the track.
__________________
ECS Ysi-B, cam, Tsp 2" longtubes, Squash dual pumps, Id1300s, meth, 4L80e, FTI 3600, ZL1 3.73 diff, BMR suspension, 15" conversion, weld rts mt 275 et street R. 9.6@147mph
|
05-11-2015, 06:34 PM | #3 |
Lets roll...
Drives: 14' Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,496
|
10.9 @131 on stock wheels with drag radials
__________________
|
05-11-2015, 07:49 PM | #4 |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
Should I be expecting tens? 20X11 rear sitting on MT 205/35/20's and front 20X10 GY F1's M6
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
05-11-2015, 07:54 PM | #5 |
Lets roll...
Drives: 14' Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,496
|
At your power level, definitely.
__________________
|
05-11-2015, 07:58 PM | #6 |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
What kinda RPM's should I launch at? Keeping in mind I have my stock rear end pretty much sold, and don't want to chunk this weekend. My ZL1 rear end wont be in for a few weeks yet.
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
05-11-2015, 08:02 PM | #7 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
10.9 to 13.0
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
05-11-2015, 08:04 PM | #8 |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
05-11-2015, 08:10 PM | #9 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
If you have never drag raced before it can be a lot to take in for the first time. Did you read the sticky we put together?
I'll go with mid 12's @ big mph if you can get it all working right. Going 10.9 first time would be a great accomplishment but it's taken my local friend who did it a bunch of tries.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
05-11-2015, 08:35 PM | #10 | |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
Quote:
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
|
05-11-2015, 08:58 PM | #11 |
Drives: 2010 camaro ss Join Date: Jun 2010
Location: Port Arthur, Tx
Posts: 2,383
|
I would say mid to high 11's on the first couple of runs. Definitely capable of doing 10's. Its all in the 60'
|
05-11-2015, 09:16 PM | #12 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
If you can pull through the gears should be in the 10's with a decent 60'.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
05-12-2015, 09:06 AM | #13 |
Future Mopar Owner
Drives: 2011, 2SS/RS, Synergy Join Date: Aug 2012
Location: TN
Posts: 2,373
|
In my old car I popped my cherry with an 11.92 run with 450rwhp.
I'm looking forward to your results. As I've stated in many threads I always "hear" of AGP cars running xxx at the track but no one ever post their results.
__________________
2005 GTO-IBM-A4-Sold
2011 Camaro SS/RS Synergy-1 of 255-Sold You will be missed but you are in good hands! 2019 Challenger Hellcat B5, Redeye, Widebody |
05-12-2015, 12:12 PM | #14 | |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
Quote:
Debating on whether or not to install my, lnc-2000, sjm line lock, and BAP before I go. I have all the parts, its just a matter of making the time to install them.
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
|
|
|
|
|