ACS Camaro with T3 fascia and SS9 Hood - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ACS Composite · 05-31-2010, 05:00 PM

Already producing some of the most popular Camaro hoods on the market, ACS is proud to offer Camaro enthusiasts the ultimate in personalization; the ACS T3 front fascia components. Shown is ACS's development Camaro with the ACS T3 Fascia and SS9 Modular hood with a carbon insert.

ACS T3 fascia is a replacement front bumper assembly with aggressive cooling ports and splitter. Cooling ports offer an efficient way to duct cold air to the front brakes or any CAI system. T3 Splitter is included with cooling channels increasing the engine’s cooling capacity by delivering cold air to the radiator. Parts are manufactured in ACS's proprietary process, same process used to manufacture over 70 000 parts for the OEM's.

T3 Front fascia can be installed on both V6 and V8 Camaros. Includes T3 cooling ports and splitter installed on a Genuine GM SS bumper.

Available individually as DIY kits are also;

- T3 Splitter; designed for Camaro SS bumpers and installed with a series of fasteners. Installation time is 10-15 minutes.

- T3 ports; includes cooling ports with backing mounting rings, trimming template and required hardware. Installation does require the front fascia to be trimmed. Installation should be done by a qualified installer in approximately 2 hours.

T3 components can be installed on any SS front bumper.

The SS9 hood is manufactured in ACS’s validated RTM process. Hood features a domed cowl higher than stock and available with a choice of 3 interchangeable hood inserts or in its basic form; a sleeper high rise version.

The polycarbonate window insert lets you show off your engine covers or better yet showcase your top mount supercharger. Heat extractor insert will evacuate heat from the engine compartment to improve performance. Heading to a car show, still want to keep a stealth look, install the carbon insert, this will instantly offer a two tone scheme, yet letting people know there is something special underneath. ACS inserts can be stored in your trunk and are all interchangeable on the SS9 hood; installation can be done alone and in minutes.

SS9 Hood on Paul2010's Camaro:

2010 SSRS · 05-31-2010, 05:01 PM

looks awesome

Bbrock25 · 05-31-2010, 05:34 PM

Looks pretty sick.

InvaderMoose · 05-31-2010, 05:36 PM

Something about the bevel over that hole really bothers me.

guiLT · 05-31-2010, 05:40 PM

This is freaking sweet.

Apex Motorsports · 05-31-2010, 05:45 PM

Love the fascia.

98_Camaro · 05-31-2010, 05:49 PM

I'm a little mixed about the fascia, but that is one sweet hood.

GearheadSS · 05-31-2010, 05:50 PM

I like the front bumper but I think it would look better without the mail slot.

nosrettap58 · 05-31-2010, 06:07 PM

I like it but i wish i didn't have to pan back and forth....back and forth.....

Inferno Man · 05-31-2010, 06:09 PM

Quote:

Originally Posted by 98_Camaro

I'm a little mixed about the fascia, but that is one sweet hood.

X2

youngoliver · 05-31-2010, 06:27 PM

Quote:

Originally Posted by 98_Camaro

I'm a little mixed about the fascia, but that is one sweet hood.

agreed, not sure bout the facia i like it but i dont... think their onto something with that design though jus needs to be tweaked a bit

ACS Composite · 05-31-2010, 06:37 PM

The SS9 hood is manufactured in ACS’s validated RTM process. Hood features a domed cowl higher than stock and available with a choice of 3 interchangeable hood inserts or in its basic form; a sleeper high rise version.

The polycarbonate window insert lets you show off your engine covers or better yet showcase your top mount supercharger. Heat extractor insert will evacuate heat from the engine compartment to improve performance. Heading to a car show, still want to keep a stealth look, install the carbon insert, this will instantly offer a two tone scheme, yet letting people know there is something special underneath. ACS inserts can be stored in your trunk and are all interchangeable on the SS9 hood; installation can be done alone and in minutes.

2010 SSRS · 05-31-2010, 06:42 PM

that looks awesome

WiccaJew · 05-31-2010, 06:43 PM

Dang those are sick they have to be expensive

05-31-2010, 05:00 PM	#1
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,254	ACS Camaro with T3 fascia and SS9 Hood Already producing some of the most popular Camaro hoods on the market, ACS is proud to offer Camaro enthusiasts the ultimate in personalization; the ACS T3 front fascia components. Shown is ACS's development Camaro with the ACS T3 Fascia and SS9 Modular hood with a carbon insert. ACS T3 fascia is a replacement front bumper assembly with aggressive cooling ports and splitter. Cooling ports offer an efficient way to duct cold air to the front brakes or any CAI system. T3 Splitter is included with cooling channels increasing the engine’s cooling capacity by delivering cold air to the radiator. Parts are manufactured in ACS's proprietary process, same process used to manufacture over 70 000 parts for the OEM's. T3 Front fascia can be installed on both V6 and V8 Camaros. Includes T3 cooling ports and splitter installed on a Genuine GM SS bumper. Available individually as DIY kits are also; - T3 Splitter; designed for Camaro SS bumpers and installed with a series of fasteners. Installation time is 10-15 minutes. - T3 ports; includes cooling ports with backing mounting rings, trimming template and required hardware. Installation does require the front fascia to be trimmed. Installation should be done by a qualified installer in approximately 2 hours. T3 components can be installed on any SS front bumper. The SS9 hood is manufactured in ACS’s validated RTM process. Hood features a domed cowl higher than stock and available with a choice of 3 interchangeable hood inserts or in its basic form; a sleeper high rise version. The polycarbonate window insert lets you show off your engine covers or better yet showcase your top mount supercharger. Heat extractor insert will evacuate heat from the engine compartment to improve performance. Heading to a car show, still want to keep a stealth look, install the carbon insert, this will instantly offer a two tone scheme, yet letting people know there is something special underneath. ACS inserts can be stored in your trunk and are all interchangeable on the SS9 hood; installation can be done alone and in minutes. SS9 Hood on Paul2010's Camaro:

05-31-2010, 05:01 PM	#2
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	looks awesome __________________ Jannetty Racing JRE Street Package

05-31-2010, 05:34 PM	#3
Bbrock25 Drives: 2010 1SS/RS Inferno Orange Join Date: Jun 2009 Location: East Ky Posts: 704	Looks pretty sick. __________________

05-31-2010, 05:36 PM	#4
InvaderMoose Drives: 2010 2SS/RS CGM Join Date: Apr 2010 Location: N/A Posts: 958	Something about the bevel over that hole really bothers me. __________________ Engine/Appearance: 530 RWHP Whipple supercharger, Full JBA Exhaust, Ported TB, Cold Air Inductions & ADM Scoop /Complete new paint, 20" Forgestar F14s, Sinister hood, SLP Spoiler, AAC Halos, P13W Fogs

05-31-2010, 05:40 PM	#5
guiLT Tampa Gulf Coast Family Drives: 2001 Maxima Join Date: Oct 2009 Location: Tampa, Florida Posts: 6,585 View My Garage	This is freaking sweet. __________________

05-31-2010, 05:45 PM	#6
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Love the fascia.

05-31-2010, 05:49 PM	#7
98_Camaro Drives: 2016 2SS Coupe Join Date: Jul 2009 Location: Los Angeles Posts: 1,365 View My Garage	I'm a little mixed about the fascia, but that is one sweet hood. __________________ Gone but not forgotten: 1998 Bright Purple Metallic Camaro 2012 Carbon Flash Metallic 2SS Convertible 2016 Summit White 2SS Coupe M6, NPP, & MRC Now Driving: 2016 Torch Red Corvette 2LT, NPP, MRC

05-31-2010, 05:50 PM	#8
GearheadSS Drives: 23 LT1/22 Colorado TB/69 Chevelle Join Date: Jun 2006 Location: Greenville, Tx Posts: 4,969 View My Garage	I like the front bumper but I think it would look better without the mail slot.

05-31-2010, 06:07 PM	#9
nosrettap58 nosrettap58 Drives: 2023 Camaro 2SS Convertible Join Date: Mar 2010 Location: Montana Posts: 195	I like it but i wish i didn't have to pan back and forth....back and forth.....

05-31-2010, 06:37 PM	#12
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,254	ACS SS9 hood on Paul2010'S Camaro The SS9 hood is manufactured in ACS’s validated RTM process. Hood features a domed cowl higher than stock and available with a choice of 3 interchangeable hood inserts or in its basic form; a sleeper high rise version. The polycarbonate window insert lets you show off your engine covers or better yet showcase your top mount supercharger. Heat extractor insert will evacuate heat from the engine compartment to improve performance. Heading to a car show, still want to keep a stealth look, install the carbon insert, this will instantly offer a two tone scheme, yet letting people know there is something special underneath. ACS inserts can be stored in your trunk and are all interchangeable on the SS9 hood; installation can be done alone and in minutes. Last edited by ACS Composite; 06-01-2010 at 10:20 AM.

05-31-2010, 06:42 PM	#13
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	that looks awesome __________________ Jannetty Racing JRE Street Package

05-31-2010, 06:43 PM	#14
WiccaJew Drives: Black & Blue 1SS Join Date: Apr 2010 Location: Back In The Desert Posts: 1,257 View My Garage	Dang those are sick they have to be expensive