Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 07-23-2013, 11:40 AM   #1
Blk_SS
 
Drives: black on black 2SS/RS
Join Date: Feb 2010
Location: Biloxi,MS
Posts: 357
Best meth kit???

Can you guys recommend a good meth kit please, looking for some that won't leak and have a good fail safe feature thanks
Blk_SS is offline   Reply With Quote
Old 07-23-2013, 11:47 AM   #2
injector
 
injector's Avatar
 
Drives: LS3
Join Date: Mar 2012
Location: Qatar
Posts: 122
Quote:
Originally Posted by Blk_SS View Post
Can you guys recommend a good meth kit please, looking for some that won't leak and have a good fail safe feature thanks
Alky control with no doubts. Julio is one of the best guys i've talked too. Will advise you to get trunk mount 4 cell tank.. You fill it once and forget about it for months.. Do a dual nozzle system and in the same time relocate your iat sensor..
__________________
Texas Speed & Performance Custom Built Forged 408 CID, PRC LS3 260CC,Fast Intake & NW 102 TB, Alky Methanol kit, ID850, LPE Dual pumps,,Melling HV oil Pump. D1SC 10PSI, Stage 2 Air Intake,Magnaflow Axle back, Mcleod clutch, Pedders XA coilovers and sway bars, HD bushings, Hurst shifter, ACS bumper and hood ports, DSS aluminum drive shaft, CSF radiator .
injector is offline   Reply With Quote
Old 07-23-2013, 12:07 PM   #3
Blk_SS
 
Drives: black on black 2SS/RS
Join Date: Feb 2010
Location: Biloxi,MS
Posts: 357
Is Julio on this forum? Or is he the one that own Alky meth kit
Blk_SS is offline   Reply With Quote
Old 07-23-2013, 12:13 PM   #4
xjer22x

 
xjer22x's Avatar
 
Drives: 2010 rs/ss black # 10,308
Join Date: Mar 2009
Location: hoffman estates, il
Posts: 914
I ran the AEM Failsafe Meth kit. Love the ease of use and installation factor. I just tapped into my windshield washer fluid as i barely use it. Plus i like that if i want to change the concentration of meth for whatever reason. I dont have to burn through a whole tub of it to do that.
xjer22x is offline   Reply With Quote
Old 07-23-2013, 12:21 PM   #5
Unreal


 
Drives: 2006 Z06
Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
Alky Control
__________________
Nick
Corvette Z06 -1200ish rwhp
Unreal is offline   Reply With Quote
Old 07-23-2013, 12:29 PM   #6
ModBargains.com
 
ModBargains.com's Avatar
 
Drives: Widebody 2013 Mustang GT
Join Date: Feb 2012
Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631
Posts: 2,848
Quote:
Originally Posted by xjer22x View Post
I ran the AEM Failsafe Meth kit. Love the ease of use and installation factor. I just tapped into my windshield washer fluid as i barely use it. Plus i like that if i want to change the concentration of meth for whatever reason. I dont have to burn through a whole tub of it to do that.

+100000

I will never run a tuned car on meth unless it has a failsafe, in which AEM has the best system designed for failsafes. Obviously they've been in the business long enough to make the right Meth kit for it, which is why I trust AEM on that.
ModBargains.com is offline   Reply With Quote
Old 07-23-2013, 12:43 PM   #7
injector
 
injector's Avatar
 
Drives: LS3
Join Date: Mar 2012
Location: Qatar
Posts: 122
Quote:
Originally Posted by Blk_SS View Post
Is Julio on this forum? Or is he the one that own Alky meth kit
owner of alky control and i don't believe he is on this forum.. i've been like you wondering which system to chose from.. do some reading and you will know why i've said alky control..
__________________
Texas Speed & Performance Custom Built Forged 408 CID, PRC LS3 260CC,Fast Intake & NW 102 TB, Alky Methanol kit, ID850, LPE Dual pumps,,Melling HV oil Pump. D1SC 10PSI, Stage 2 Air Intake,Magnaflow Axle back, Mcleod clutch, Pedders XA coilovers and sway bars, HD bushings, Hurst shifter, ACS bumper and hood ports, DSS aluminum drive shaft, CSF radiator .
injector is offline   Reply With Quote
Old 07-23-2013, 12:58 PM   #8
Unreal


 
Drives: 2006 Z06
Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
AEM may have a decent controller but I wouldn't run any kit that doesn't use SS lines. All the plastic lines I've seen leak over time. I don't want a fire or blown motor from a leaking meth line. If you go with a kit that isn't alky control, atleast budget to upgrade all the lines to SS ones.
__________________
Nick
Corvette Z06 -1200ish rwhp
Unreal is offline   Reply With Quote
Old 07-23-2013, 01:11 PM   #9
Blk_SS
 
Drives: black on black 2SS/RS
Join Date: Feb 2010
Location: Biloxi,MS
Posts: 357
What price range do the alky kit run in
Blk_SS is offline   Reply With Quote
Old 07-23-2013, 01:58 PM   #10
Rockit_z28
www.1baddogracing.com
 
Rockit_z28's Avatar
 
Drives: 2010 IOM 2SS/RS Auto
Join Date: Apr 2011
Location: Indian Land, SC
Posts: 998
Alky Control talk to Matt at FSP and he will get you the correct kit designed for the Camaro.
__________________
2010 Camaro 2SS/RS Aqua Blue Metalllic (bolt-ons)
2020 Camaro 2SS/RS Satin Steel Metallic - Shock and Steel Edition 1 of 98 - A10 (bolt-ons)
2010 Camaro 2SS/RS IOM - 1,023 RWHP 813RWTQ (Previous Paxton Record Holder: 9.82@139)

Built and Tuned by Heintz Racing
Go: DSS 9", RPM Trans TH400, Carlyle Racing 15" Conversion, ECS Vortech YSI-B, Fore Fuel System, ID1700, Gall Racing 427 C.I LSX, Mast 285CC Heads, HR Custom Cam

Show: Custom Painted Stripes/Badges (Orange Pearl over White), Z/TA Spoiler, VFN Hood, Weld Wheels
http://www.HeintzRacing.com
http://www.youtube.com/user/1baddogracing










Rockit_z28 is offline   Reply With Quote
Old 07-23-2013, 02:05 PM   #11
Inferno LSX
Supercharged LSX
 
Inferno LSX's Avatar
 
Drives: 2011 2SS/RS Black/Carbon Fiber
Join Date: Dec 2010
Location: City of Angels
Posts: 6,741
I got the AIS kit cuz I liked their Camaro trunk tank and upgraded to stainless lines. Name:  ImageUploadedByTapatalk1374606266.457314.jpg
Views: 4031
Size:  85.3 KB
__________________
Inferno LSX is offline   Reply With Quote
Old 07-23-2013, 02:16 PM   #12
dan0617
 
dan0617's Avatar
 
Drives: 2011 Inferno Orange SS Convertible
Join Date: Apr 2012
Location: Tyrone, PA
Posts: 640
Don't laugh but on my vette I had a Mr Freeze kit from Anderson Ford Motorsport. No electrical parts to fail, very consistent. I was running 70% meth through the Vortech T trim at 16 psi boost. My only complaint was the tank size was small for the size of nozzle i was running. 16 psi can take alot of meth if you tune for it! I took the low washer fluid sensor out of the washer reservoir in the bottom of the Mr Freeze tank, was the only safety feature needed! Thought about doing the same thing with this car but I intercool with nitrous and its enrichment fuel!

For sure not the best meth kit but it is the cheapest and quickest to install and likely the most fail safe!
__________________
2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.
dan0617 is offline   Reply With Quote
Old 07-23-2013, 02:27 PM   #13
Unreal


 
Drives: 2006 Z06
Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
$500-600 for an alkycontrol kit.

If anything I would do the alkycontrol kit then just buy the AIS trunk bottle if that is how you want to go. Matt@FSP can get you setup.
__________________
Nick
Corvette Z06 -1200ish rwhp
Unreal is offline   Reply With Quote
Old 07-23-2013, 02:34 PM   #14
Detoxx03
ЯєŧąяĐ Єl¡m¡иąŧøя ™
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 876
Alky Control kit.
__________________

D1SC Procharger 932/758 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.