Stability track fuse number anyone******* - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

montreal2010yellow · 04-29-2011, 07:05 PM

Ok I was reinstalling my old CAI and did a fuse pull. While doing so I did open the trunk with the remote and then I heard all that cliking in the engine fuse box.

Got my installation done and when I started the car I had this Stability track Service message and all 3 lights Stability Track, traction control and skid car are staying lighted.

I want to check the fuse but could'nt find it in the user manual and on this site.

Can anyone tell me what is the fuse number so I can start by checking it before going to the dealer.

Thanks.

montreal2010yellow · 04-29-2011, 08:32 PM

Anyone???????

Scott@Bjorn3D · 04-29-2011, 08:39 PM

You have now freaked the computer. You are not supposed to open the door or the trunk with the fuses pulled. The BCM computer went to talk to the ECM computer and it had no power because the fuses are gone. You may try to battery disconnect over night, but a friend of mine had to have his flat bedded to the dealer after doing what you did.

montreal2010yellow · 04-29-2011, 08:45 PM

Thanks for the input....

Scott@Bjorn3D · 04-29-2011, 08:55 PM

Well hopefully the battery overnight pulled will fix it, but remember do not shut the trunk or you will not be able to get it opened.

One Mean Chevy · 04-29-2011, 09:13 PM

Quote:

Originally Posted by Scott@Bjorn3D

Well hopefully the battery overnight pulled will fix it, but remember do not shut the trunk or you will not be able to get it opened.

Sure he can get the trunk back open if he closes it. Fold Down the Pass-Through, Crawl in the Trunk and pull the Trunk Release.

It just won't be fun.

montreal2010yellow · 04-30-2011, 01:37 PM

When I woke uo this morning I was kind of anxious because of te Stability Track thing, and I had to go play golf very early and drive about 40 miles....

I read here and there that there would'nt be any dammages to the car driving without Stability Track....but I did'nt like the idea.
Got into the car, put the key in, turned it, and Surprise: NO MORE ERROR MESSAGE. All warning lights where off.

So Autobot did curred kit itself during the night. Ouuufffffff.

All that without disconnecting the battery.

04-29-2011, 07:05 PM	#1
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	Stability track fuse number anyone***** Ok I was reinstalling my old CAI and did a fuse pull. While doing so I did open the trunk with the remote and then I heard all that cliking in the engine fuse box. Got my installation done and when I started the car I had this Stability track Service message and all 3 lights Stability Track, traction control and skid car are staying lighted. I want to check the fuse but could'nt find it in the user manual and on this site. Can anyone tell me what is the fuse number so I can start by checking it before going to the dealer. Thanks. __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...**

04-29-2011, 08:32 PM	#2
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	Anyone??????? __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

04-29-2011, 08:45 PM	#4
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	Thanks for the input.... __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

04-30-2011, 01:37 PM	#7
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	Autobot fixed itownslef...... When I woke uo this morning I was kind of anxious because of te Stability Track thing, and I had to go play golf very early and drive about 40 miles.... I read here and there that there would'nt be any dammages to the car driving without Stability Track....but I did'nt like the idea. Got into the car, put the key in, turned it, and Surprise: NO MORE ERROR MESSAGE. All warning lights where off. So Autobot did curred kit itself during the night. Ouuufffffff. All that without disconnecting the battery. __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H-Team Track Day at the Streets of Willow	Hotchkis	Camaro Motorsports Discussions	1	03-25-2011 02:45 PM
The Official Camaro5 Fest II Track Attack By Pfadt Race Engineering	PfadtRacing	Dragstrip and Launch Techniques Discussion	3	12-19-2010 07:07 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 06:08 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 12:31 AM
U.S. plans to require stability control on all new cars	KILLER74Z28	General Automotive + Other Cars Discussion	3	09-14-2006 06:08 AM

04-29-2011, 08:39 PM	#3
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	You have now freaked the computer. You are not supposed to open the door or the trunk with the fuses pulled. The BCM computer went to talk to the ECM computer and it had no power because the fuses are gone. You may try to battery disconnect over night, but a friend of mine had to have his flat bedded to the dealer after doing what you did.

04-29-2011, 08:55 PM	#5
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	Well hopefully the battery overnight pulled will fix it, but remember do not shut the trunk or you will not be able to get it opened.