02-26-2017, 02:27 AM | #1 |
Drives: 2011 Camaro 2SS Join Date: Jan 2017
Location: Las Vegas
Posts: 145
|
Random grinding noise
So whenever I turn the motor over by hand, I can hear some grinding noise coming from the oil pan. It's totally at random and only seams to do it when I stop cranking for a few seconds and then start again. If you continually turn the motor over it doesn't do it. Also when it does grind, if you back up a little bit and then go forward again it doesn't grind again... Really confused on what it is... Here is a video... It happens at 6 seconds.
https://youtu.be/Hl0zSraS2_Y
__________________
2011 Camaro SS - Kooks 1 7/8" LTH - Kooks HFC - Solo Mach XL Catback - CAI Intake - VMAX TB - Howards ASA Cam |
02-27-2017, 01:59 AM | #2 |
Drives: 2011 Camaro 2SS Join Date: Jan 2017
Location: Las Vegas
Posts: 145
|
Also, when the motor is running I don't hear the same noise...
__________________
2011 Camaro SS - Kooks 1 7/8" LTH - Kooks HFC - Solo Mach XL Catback - CAI Intake - VMAX TB - Howards ASA Cam |
02-28-2017, 05:08 PM | #3 |
Drives: 2010 ss Join Date: Oct 2015
Location: windom mn
Posts: 337
|
not sure if u r 6sp or auto,but if u have replaced the flywheel,you might have to put a shim on top of the starter
|
03-01-2017, 07:24 AM | #4 |
Drives: 2011 Camaro 1SS Victory Red Join Date: Jun 2016
Location: Columbia City, IN
Posts: 54
|
I was going to ask if it was something with the starter. like the previous person. I would start there.
__________________
2011 LS3 M6 Rotofab CAI, Comp Custom Grind Cam 224 / 234 @ .050, .581/.576 w/ 1.7 rocker, 114 lobe sep 110 int c/l, Borla Full Exhaust, Ridetech Stage 2 Coilovers, McLeod RXT Street Twin Clutch, JPSS front and rear sway bars, JPSS caster locks, Forgeline GA3R Wheels Victory Red inner and outer barrels and matte back Spokes wrapped in Bridgestone 305 re71r on all four corners, Other JPSS Stuff. 455RWHP and 411RWTQ on Nascar Dyno.
|
|
|
|
|