ADM scoop and washer pump - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

joey0480 · 01-09-2012, 09:52 AM

Got the ADM scoop in and all. Just wanna make sure no one sees an issue with the way the pump is mounted. It is literally right at the top of the scoop. (note the hose is out of the way...was just dangling in the picture)

The Stig · 01-09-2012, 10:27 AM

As long as the hose isn't pinched you should be fine.

caverman · 01-09-2012, 11:15 AM

Agreed...as long as nothing is pinched you should be okay.

I would go to Lowes or Home Depot and find a clamp to go around it and hold it using the bolt just to the left of the pump.

MRGOODWRENCH3 · 01-09-2012, 08:57 PM

Mine is similar but I used a clamp around the pump.

Jekyll-N-Hyde · 01-09-2012, 10:09 PM

Quote:

Originally Posted by MRGOODWRENCH3

Mine is similar but I used a clamp around the pump.

Adm installed mine when I had my conversion done and mine looks to be mounted in the same place as yours

01-09-2012, 09:52 AM	#1
joey0480 Drives: 2013 Evo X Join Date: Sep 2011 Location: New Jersey Posts: 562	ADM scoop and washer pump Got the ADM scoop in and all. Just wanna make sure no one sees an issue with the way the pump is mounted. It is literally right at the top of the scoop. (note the hose is out of the way...was just dangling in the picture) __________________ 2013 Evo X GSR (SSS, leather, exterior package)....stage 2 bro SOLD:Team L99 ADM Race Intake and Scoop Vmax Ported TB Borla-S axlebacks ARH 1 7/8 Long Tubes and Hi Flo Cats 160 Thermostat Pfdat front and rear sways and endlinks Gold Pearl Powdercoated calipers Gloss black CFD strut covers GM gill stripes ******** 12" Stealth Kicker Package

01-09-2012, 10:27 AM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	As long as the hose isn't pinched you should be fine. __________________

01-09-2012, 11:15 AM	#3
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Agreed...as long as nothing is pinched you should be okay. I would go to Lowes or Home Depot and find a clamp to go around it and hold it using the bolt just to the left of the pump. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - ADM Scoop & Apex Washer Tank Installed with a CAI intake	ClutchKargo	Camaro DIY & HOW-TO instructions & discussions	44	03-08-2016 05:52 PM
Cold Air Inductions Intake System! ADM Performance Cold Air Scoop! & Packages!	AutoAgenda	V8 Bolt-Ons & Tunes	438	11-23-2013 10:49 PM
2010+ Camaro V6/V8 Roto-Fab Washer Reservoir Relocation Kit & ADM Performance Scoop!	AutoAgenda	Miscellaneous Items	38	07-02-2013 02:12 AM
$40.00 OFF Cold Air Inductions Packages! ADM Performance Scoop \| Roto-Fab Reservoir!	AutoAgenda	V6 Bolt-Ons & Tunes	119	06-17-2013 12:18 PM
2010+ Camaro V6/V8 Roto-Fab Washer Reservoir Relocation Kit & ADM Performance Scoop!	AutoAgenda	V8 Bolt-Ons & Tunes	39	08-10-2012 01:41 PM

01-09-2012, 08:57 PM	#4
MRGOODWRENCH3 Account Suspended Drives: 2010 Camaro 2SS/RS Join Date: Feb 2011 Location: Park City, Utah Posts: 670 View My Garage	Mine is similar but I used a clamp around the pump.