07-18-2014, 12:29 PM | #1 |
Lug nuts for ZR1 replica's?
So I got my ZR1 18's replicas for the drag track and my MT drag radials. Though I didn't get lug nuts and I noticed my stock lug nuts don't fit.
Anyone know if I have to get Corvette lug nuts from Chevy or can I just get some cheap alternative since they are just for the track?
__________________
2010 Camaro SS, 6 SPD, Magnuson TVS 2300 Supercharger
Headers, full exhaust work, 630HP. Corvette 18's MT drag radials (Work done by Davenport Motorsports) |
|
07-18-2014, 06:34 PM | #2 |
Or I guess better question is what lug nuts do I need to fit the studs with these wheels?
__________________
2010 Camaro SS, 6 SPD, Magnuson TVS 2300 Supercharger
Headers, full exhaust work, 630HP. Corvette 18's MT drag radials (Work done by Davenport Motorsports) |
|
07-18-2014, 06:36 PM | #3 |
Slowhawk Built
Drives: 2010 Supercharged SS Join Date: Apr 2014
Location: CT
Posts: 819
|
Stock lugs work so you can use them.
|
07-18-2014, 06:39 PM | #4 |
I was sure I tried them and they were too fat? Are they just a standard 12mm x 1.5?
__________________
2010 Camaro SS, 6 SPD, Magnuson TVS 2300 Supercharger
Headers, full exhaust work, 630HP. Corvette 18's MT drag radials (Work done by Davenport Motorsports) |
|
07-18-2014, 07:00 PM | #5 |
Slowhawk Built
Drives: 2010 Supercharged SS Join Date: Apr 2014
Location: CT
Posts: 819
|
I'm under the assumption that the zr1's are the same as the zo6's. If the spot for the lug to enter the wheel is small you need a tuner lug nut. They are skinny. It's was needed for the Bogarts. Try Gorilla. I don't remember who made the ones I used. Sorry.
__________________
9.21 @ 149 Slowhawk Performance
|
07-18-2014, 07:04 PM | #6 |
Yes, I just checked and I need "skinny" ones. I would think factory Mcgard Corvette replacements should fit.
__________________
2010 Camaro SS, 6 SPD, Magnuson TVS 2300 Supercharger
Headers, full exhaust work, 630HP. Corvette 18's MT drag radials (Work done by Davenport Motorsports) |
|
07-18-2014, 07:12 PM | #7 |
Slowhawk Built
Drives: 2010 Supercharged SS Join Date: Apr 2014
Location: CT
Posts: 819
|
http://www.gorilla-auto.com/small-di...g-nuts-page-02
I needed to use the duplex series. 2nd row all the way to the left.
__________________
9.21 @ 149 Slowhawk Performance
|
07-18-2014, 09:11 PM | #8 |
376 cubic inches of fun
|
|
07-19-2014, 11:26 AM | #9 | |
Quote:
__________________
2010 Camaro SS, 6 SPD, Magnuson TVS 2300 Supercharger
Headers, full exhaust work, 630HP. Corvette 18's MT drag radials (Work done by Davenport Motorsports) |
||
|
|
|
|