03-13-2018, 12:00 AM | #1 |
ZL1 10 Spoke Wheel Finish
I am looking to order a set of 18" ZL1 10 spoke replicas for a drag setup and I am not sure if the factory finish is gloss or satin black. I can't seem to find any info online either so I figured I would check here.
__________________
2015 Camaro ZL1 - 769RWHP 755RWTQ Mods: RPM 5" intake, Kooks 2" headers w/o cats, 9.1" lower, 2.55" upper, Kong performance ported blower/snout, NW 102mm TB, afco hx w/ fans, RPM cam package, ID1050x injectors,160 degree t-stat, Tuned by Fran at RPM
Best 1/4 mile: 10.99@127 Dyno graph YouTube 2003 C5 Z06 - SOLD Mods: 455 RWHP 415RWTQ FBO and FTI Street Sweeper Cam (236/240 .631/.612 111 lsa) |
|
03-13-2018, 07:18 AM | #2 |
Drives: 1968 Camaro, 2012 ZL1 Join Date: Nov 2011
Location: Aston, PA
Posts: 398
|
More of a semi gloss really.
|
03-13-2018, 11:12 AM | #3 |
Yeah, which is why I was leaning towards the satin finish but I want the rear reproductions to match the fronts as best as I can.
__________________
2015 Camaro ZL1 - 769RWHP 755RWTQ Mods: RPM 5" intake, Kooks 2" headers w/o cats, 9.1" lower, 2.55" upper, Kong performance ported blower/snout, NW 102mm TB, afco hx w/ fans, RPM cam package, ID1050x injectors,160 degree t-stat, Tuned by Fran at RPM
Best 1/4 mile: 10.99@127 Dyno graph YouTube 2003 C5 Z06 - SOLD Mods: 455 RWHP 415RWTQ FBO and FTI Street Sweeper Cam (236/240 .631/.612 111 lsa) |
|
04-05-2018, 10:22 AM | #4 |
For anyone that might find this later I ended up going with the satin finish and it is about as close to stock as you will get for an aftermarket wheel.
__________________
2015 Camaro ZL1 - 769RWHP 755RWTQ Mods: RPM 5" intake, Kooks 2" headers w/o cats, 9.1" lower, 2.55" upper, Kong performance ported blower/snout, NW 102mm TB, afco hx w/ fans, RPM cam package, ID1050x injectors,160 degree t-stat, Tuned by Fran at RPM
Best 1/4 mile: 10.99@127 Dyno graph YouTube 2003 C5 Z06 - SOLD Mods: 455 RWHP 415RWTQ FBO and FTI Street Sweeper Cam (236/240 .631/.612 111 lsa) |
|
04-05-2018, 11:04 AM | #5 |
GPI Sales Consultant
|
__________________
GPI Max Package 2.0: Brodix BR7 heads/GPI porting, MAX3 cam, ST2116LSR, BSR Max Lift rockers, LS7 LSXR with 103mm TB, Vararam OTR, Mcleod RXT, G-Force/Strange 9" IRS setup with 4.63 gear. 551whp, 11.1@124mph.
Got a question about a GPI product? Feel free to shoot me a message! |
04-09-2018, 10:08 PM | #6 |
I just noticed this post lol. Pics are posted below showing the satin black finish and the factory wheel is the one on the left mounted to the car.
__________________
2015 Camaro ZL1 - 769RWHP 755RWTQ Mods: RPM 5" intake, Kooks 2" headers w/o cats, 9.1" lower, 2.55" upper, Kong performance ported blower/snout, NW 102mm TB, afco hx w/ fans, RPM cam package, ID1050x injectors,160 degree t-stat, Tuned by Fran at RPM
Best 1/4 mile: 10.99@127 Dyno graph YouTube 2003 C5 Z06 - SOLD Mods: 455 RWHP 415RWTQ FBO and FTI Street Sweeper Cam (236/240 .631/.612 111 lsa) |
|
|
|
|
|