10-12-2012, 09:14 AM | #1 |
Her Name is Mila
Drives: 2012 Camaro 1LT A6, 2014 Camaro 1LS Join Date: May 2012
Location: USA
Posts: 1,322
|
MRT V1 Installation
Hey guys I am getting my MRT V1 today and gonna install is most likely tonight.... Any tips? And how far did you cut after the muffle?
__________________
|
10-19-2012, 08:16 AM | #2 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
The measurements are in the instructions. Jack up the back end nice and high to give your self some room. Mark the cutting point with a marker and place some masking or painters tape on each side of the mark. That way you have an easy target to cut. Slip the new cans on and hand tighten the clamps. Make sure your tips are lined up right (helps if you have a second set of hands) and finish clamping them down. Start er up and enjoy!
Last edited by Juiced1; 10-19-2012 at 08:17 AM. Reason: MRT, 91A176 |
05-10-2013, 10:45 AM | #3 |
You say "clamps" where do you get them? are they with the exhaust?
|
|
|
|
Tags |
91a176, mrt |
|
|