05-13-2010, 11:51 PM | #1 |
Drives: 2010 Camaro RS/2SS Join Date: Jan 2010
Location: Fort Wayne
Posts: 261
|
NEW JL 1000 WATT Custom Audio Build Pics!
Combined thread.
Here are the photos of my JL audio build. The amp is not mounted yet because I found out it needed serviced as I was setting it up. Also I am building a custom ported rear panel to cover the pass through! Once I get it thumping I may need more insulation in the trunk lid void. I have a C.A.D. drawing of the box with dimmensions if anyone wants? Trust me it is the best size that will fit in the trunk. I used a 1000/1 JL amp. 12"W7. JL audio remote bass adjust. Aluma Pro 5 farad cap. Stinger 135 amp breaker. EL wire to light the internals of the amp. All 3/4 MDF box 2x in the front plate. The RCA were spliced into the X3 connector with Stinger solder females. 4 Gauge wire. Here is a video. The rattle is really not that bad, sounds worse in the video. I am goint to put some expanding foam in the trunk lid gap to add support to the middle. The amp is on ZERO gain of the high level! I could probably switch it to low and run it half, I will have to do some adjusting. Either way it sounds AMAZING now and the stock BA mids and highs keep up decent. Build and roof flex. Just roof flex.
__________________
1100, Preliminary order accepted (01/30/2010)
6000, Delivered to the customer (02/27/2010) YA, she came that quick! $IMJAYBIRD$ Last edited by Imjaybird; 10-02-2010 at 07:03 PM. Reason: Added final video! |
05-13-2010, 11:52 PM | #2 |
|
Nice
__________________
Jannetty Racing JRE Street Package
|
05-14-2010, 12:47 AM | #3 |
Rhymin and Stealin
|
what is the selonoid below the circuit breaker for?
it also looks like you have 3 runs of power wire running from teh battery... or am I missing something?
__________________
Bryan
I Make Cars Sound Good. Enchantment Editions Arc Audio Competition Team Image Dynamics Elite Sound Performance Team Team Stinger |
05-14-2010, 09:42 AM | #4 |
Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009
Location: southern Illinois
Posts: 2,973
|
I'm guessing the solenoid is for the remote turn on, and I see multiple runs of power coming out of the battery area too.
Wasted your money on the cap, should have upgraded your battery. Otherwise the enclosure looks pretty good in there.
__________________
PacMan
|
05-14-2010, 12:18 PM | #5 |
Drives: 2017 ZL1 Join Date: Dec 2009
Location: NYC
Posts: 1,165
|
Clean box bro. The only question I have, Now your trapping all the bass in the trunk how bad do you think the rattle is gonna be?
__________________
Elite Design Concepts NY5THGEN2017 ZL1 Garnet Red/M6/// IG @Crazl1
|
05-14-2010, 12:24 PM | #6 | |
Drives: 2010 Camaro RS/2SS Join Date: Jan 2010
Location: Fort Wayne
Posts: 261
|
Quote:
There are not multiple runs. One run from the battery to the breaker then to the selonoid then back to the cap. The cap was given to me unused so I figured I would make use of it. I'm not big on replacing things that are not worn out yet, ie the battery. After awhile I may put in another battery, there is plenty of room for one.
__________________
1100, Preliminary order accepted (01/30/2010)
6000, Delivered to the customer (02/27/2010) YA, she came that quick! $IMJAYBIRD$ |
|
05-14-2010, 12:27 PM | #7 |
Drives: 2010 Camaro RS/2SS Join Date: Jan 2010
Location: Fort Wayne
Posts: 261
|
There is about 4 to 5 inches above the entire enclosure. I extended the carpet all the way up to hide it. There will be a board in the pass through with ports in it. I used a lot of sound mat and may need to add more but am waiting for the amp to come back from JL, could be 2 weeks.
__________________
1100, Preliminary order accepted (01/30/2010)
6000, Delivered to the customer (02/27/2010) YA, she came that quick! $IMJAYBIRD$ |
05-14-2010, 07:12 PM | #8 | |
Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009
Location: southern Illinois
Posts: 2,973
|
Quote:
He's not trapping anything in the trunk. Bass is omnidirectional and the wavelengths are big. Maybe if he wrapped the trunk in lead it would be trapped, otherwise, he's good. Rattle? Yep, unless it's heavily deadened. Trapped? Ain't happening, not to any amount a human ear will pick up.
__________________
PacMan
|
|
05-15-2010, 10:32 PM | #9 | |
Drives: 2010 Camaro RS/2SS Join Date: Jan 2010
Location: Fort Wayne
Posts: 261
|
Quote:
__________________
1100, Preliminary order accepted (01/30/2010)
6000, Delivered to the customer (02/27/2010) YA, she came that quick! $IMJAYBIRD$ |
|
05-15-2010, 11:07 PM | #10 |
Account Suspended
|
You might want to double check with jl but if I do remember you should not use a cap with a slash amp. It will mess up the rips power supply.
|
05-15-2010, 11:24 PM | #11 |
|
Nice set up!
|
05-16-2010, 12:36 AM | #12 |
Groverat
Drives: 2010 Camaro Join Date: Jan 2010
Location: N.Texas
Posts: 31
|
Rattle like hell !! I have 2000 watt's going to my subs !
|
05-16-2010, 08:49 PM | #13 |
Drives: 2010 Camaro RS/2SS Join Date: Jan 2010
Location: Fort Wayne
Posts: 261
|
Thanks, I didn't even think of that. I'll give them a call when I get the amp back. Good looking out.
__________________
1100, Preliminary order accepted (01/30/2010)
6000, Delivered to the customer (02/27/2010) YA, she came that quick! $IMJAYBIRD$ |
05-17-2010, 12:19 AM | #14 |
Madman
|
remember hearing something like that also about the amp &cap
|
|
|
Tags |
bass, custom sub enclosure, jl audio |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SS Build - Custom Cam & D1 Procharger! | IPS Brandon | Forced Induction - V8 | 11 | 09-17-2009 08:26 AM |
LMR's 7.0L 427ci Build Pics Inside!! | Late Model Racecraft | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 10 | 09-07-2009 07:48 AM |