05-19-2013, 02:29 PM | #1 |
Drives: 2013 Camaro 2SS Join Date: Mar 2013
Location: Albany, ny
Posts: 28
|
wiring help
so i need to make some splices(into my rear speakers) for my rockford fosgate p300-10, powered subwoofer. I have the BA prem stereo. Let me know if this is right:
left speaker:dark blue/white tracer is positive, green negative right speaker: dark green positive, light blue/black tracer negative In the wiring harness for each speaker I have: left speaker - 2 blue/white tracer wires, 1 green/black tracer, 1 solid blue right speaker - 2 light blue/black tracer wires, 1 solid green and 1 solid light blue. thx |
05-20-2013, 02:27 PM | #2 |
Drives: 2013 Camaro 2SS Join Date: Mar 2013
Location: Albany, ny
Posts: 28
|
oops i think i meant the wire i have is green with black tracer on the left rear speaker.
|
05-20-2013, 06:52 PM | #3 |
Drives: 2013 Camaro 2SS Join Date: Mar 2013
Location: Albany, ny
Posts: 28
|
i read that this install was easy, its not. if there is 4 wires per speaker and i have to user the blue with white tracer, which one would i use, there are 2 blue wires with white tracer. ditto for the other speaker - 2 blue with black tracer
|
05-20-2013, 07:22 PM | #4 |
Drives: 2018 1LE Join Date: Feb 2013
Location: delaware
Posts: 319
|
You are grabbing your single on the wrong side of the amp. You are trying to pick up sing after the amp the easy thing to do is find oem amp and tap single from radio to amp this will give a full range single use the rear speaker inputs there is a 44 pin harness on the amp look for brown yellow and brown wight for left speaker brown yellow + and for right dark blue and tan blue is + oem left side of trunk
|
05-20-2013, 07:32 PM | #5 |
Drives: 2018 1LE Join Date: Feb 2013
Location: delaware
Posts: 319
|
Oh by the way they should be twisted togater
|
05-21-2013, 07:19 AM | #6 |
Drives: 2013 Camaro 2SS Join Date: Mar 2013
Location: Albany, ny
Posts: 28
|
whats the difference between grabbing on the low side, than the high side. it looks like a lot people grabbed it on the high side. so what you are saying is
right rear - tan right rear + dark bluc left rear - brown left rear + brown/white |
05-21-2013, 10:52 AM | #7 |
Drives: 2018 1LE Join Date: Feb 2013
Location: delaware
Posts: 319
|
There not getting a full range single. They are only get the bass side so if you ever won't go upgrade to a 4 or 5 ch you are already taped In that is if you won't go keep the oem radio and you a 4 ch high low. Also this will help whit tuning sub. Plus it is just easy to if find at the amp just look for the wires that are twisted
|
|
|
|
|