Ported intake manifold - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BFASTNOTLAST · 05-20-2016, 09:01 PM

The picture posted from Camarodream is actually my intake that I posted a while back. As far as gains it was through the whole curve not just a peak number. A must have IMO.

CamaroDreams76 · 05-20-2016, 09:40 PM

Quote:

Originally Posted by BFASTNOTLAST

The picture posted from Camarodream is actually my intake that I posted a while back. As far as gains it was through the whole curve not just a peak number. A must have IMO.

I searched and that was the best picture I could find.

Been looking into doing the rod mod, thanks for the info

Soybeanrice · 05-21-2016, 12:37 AM

So without heads, the rod mod isn't really worth much?

L99CAMA2011 · 05-21-2016, 07:39 AM

I am looking at the GPI Intake manifold. Around $500.

BFASTNOTLAST · 05-21-2016, 11:20 AM

Quote:

Originally Posted by Soybeanrice

So without heads, the rod mod isn't really worth much?

Negative. I still have stock heads and there is a gain there.

Soybeanrice · 05-21-2016, 03:18 PM

Quote:

Originally Posted by L99CAMA2011

I am looking at the GPI Intake manifold. Around $500.

I saw 275... youre talking about the rod mod right? 575 with core but 300 is refunded

Soybeanrice · 05-21-2016, 03:23 PM

Quote:

Originally Posted by BFASTNOTLAST

Negative. I still have stock heads and there is a gain there.

Really considering ... Since I'm putting an adm intake and bo white tb to get this before the retune. I just dont want to be fronting 300 bucks for 5hp/tq.

Pushrod Pete · 05-21-2016, 03:24 PM

Quote:

Originally Posted by Soybeanrice

I saw 275... youre talking about the rod mod right? 575 with core but 300 is refunded

is it this one?

http://shop.gwatneyperformance.com/ls3intakemod.aspx

flyer08 · 05-21-2016, 03:53 PM

Yes

Soybeanrice · 05-21-2016, 03:58 PM

Quote:

Originally Posted by Pushrod Pete

is it this one?

http://shop.gwatneyperformance.com/ls3intakemod.aspx

Yup. Sucks that heads are out of my range for now. I dont feel like waiting for the $$ cause I want to get a nice tune before heading to PBIR, Sebring and the strip

olblue75 · 05-23-2016, 07:38 PM

So what does it actually do???

Soybeanrice · 05-23-2016, 10:15 PM

Quote:

Originally Posted by olblue75

So what does it actually do???

I saw a picture on the g8 forums.. Pretty much they debur the intake's ports and then the rods create a better way for the air to flow into the port. Instead of the air pinching itself off on the outsides of the port as air is being sucked in, the rods guide the air into using the entirety of the port. I wish I saved the picture...

I'm wondering what I could get out of it being cammed but having stock heads.

bionick · 05-23-2016, 11:19 PM

Is an adjustment to the tune need to be done for the GPI rodmod?

Bo White · 05-24-2016, 12:59 AM

No. It's like a ported TB.

05-20-2016, 09:01 PM	#15
BFASTNOTLAST Drives: 2012 SS LS3 Join Date: Mar 2012 Location: Denver NC Posts: 1,411 View My Garage	The picture posted from Camarodream is actually my intake that I posted a while back. As far as gains it was through the whole curve not just a peak number. A must have IMO. __________________

05-23-2016, 07:38 PM	#25
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,063	So what does it actually do??? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

05-23-2016, 11:19 PM	#27
bionick Drives: 2010 2SS/RS M6 Join Date: Oct 2013 Location: Gilbert, AZ Posts: 931 View My Garage	Is an adjustment to the tune need to be done for the GPI rodmod? __________________ 2010 Camaro 2SS/RS \| 416 LS3 \| FED stage 2 heads

05-21-2016, 12:37 AM	#17
Soybeanrice Drives: 2014 2SS/RS Join Date: Jun 2013 Location: Orlando, FL Posts: 793	So without heads, the rod mod isn't really worth much?

05-21-2016, 07:39 AM	#18
L99CAMA2011 Drives: One of the baddest handling Gen 5s Join Date: Feb 2011 Location: Masachusetts Posts: 4,177	I am looking at the GPI Intake manifold. Around $500.

05-21-2016, 03:53 PM	#23
flyer08 Account Suspended Drives: 2010 2SS/RS Join Date: Jun 2009 Location: Texas Posts: 3,418	Yes

05-24-2016, 12:59 AM	#28
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	No. It's like a ported TB.