SLP 1.85 ratio shaft rockers for LS3! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SC2150 · 05-31-2013, 11:49 AM

Reg $649, 1 set only (out of box, installed on engine bfore customer decided to go cam instead) $ 450 shipped!!!! (typo at first!)

941-721-1826

LOL! $450!!!!

http://www.wallaceracing.com/rockercalc.php

It will increase lift, but not duration...and these are super stable for high RPM running.

nyrfan · 05-31-2013, 11:56 AM

Quote:

Originally Posted by SC2150

Reg $649, 1 set only (out of box, installed on engine bfore customer decided to go cam instead) $ 4500 shipped!!!!

941-721-1826

LOL, I'm guessing you have the shipped price wrong.

Azzkker · 05-31-2013, 05:36 PM

tracy, how much lift would the LSA cam have with these rockers installed?

Azzkker · 05-31-2013, 11:02 PM

Tracy wanted me to post up this calculator to aid in my question.

http://www.wallaceracing.com/rockercalc.php
Stock ls3/l99 LSA ratio is 1.7

flht99b · 06-01-2013, 05:54 AM

How durable and dependable will these be on an LS9 cammed LS3 used on the street and road course. Current valve springs are Comp Cam beehive 26918 and supporting valve train upgrades include IWIS C5 R heavy duty timing chain, Chevrolet 3 bolt cam gear and Chevrolet LS2 dampener.
Ed M.

SC2150 · 06-01-2013, 10:13 AM

Do the calculations on your lift to make sure you would not be exceeding the 918's lift limits and they would be an awesome addition. The stability improvement over the stock valve train is substantial.

SC2150 · 06-07-2013, 06:58 PM

Bump!!! Great affordable way to up your cams lift up AND improve the valvetrains stability.

SC2150 · 06-10-2013, 03:15 PM

Still available

SC2150 · 07-13-2013, 06:02 PM

$450 shipped!!! Best price you will find for like new. L99 or LS3.

SC2150 · 07-22-2013, 04:43 PM

Bump for a killer deal!

05-31-2013, 11:49 AM	#1
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	SLP 1.85 ratio shaft rockers for LS3! Reg $649, 1 set only (out of box, installed on engine bfore customer decided to go cam instead) $ 450 shipped!!!! (typo at first!) 941-721-1826 LOL! $450!!!! http://www.wallaceracing.com/rockercalc.php It will increase lift, but not duration...and these are super stable for high RPM running. Last edited by SC2150; 05-31-2013 at 08:47 PM.

06-01-2013, 05:54 AM	#5
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	How durable and dependable will these be on an LS9 cammed LS3 used on the street and road course. Current valve springs are Comp Cam beehive 26918 and supporting valve train upgrades include IWIS C5 R heavy duty timing chain, Chevrolet 3 bolt cam gear and Chevrolet LS2 dampener. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

05-31-2013, 05:36 PM	#3
Azzkker Drives: 2013 AGM ZL1, 99 z28, 89 iroc-z Join Date: Jul 2012 Location: Decatur, IL Posts: 249	tracy, how much lift would the LSA cam have with these rockers installed?

05-31-2013, 11:02 PM	#4
Azzkker Drives: 2013 AGM ZL1, 99 z28, 89 iroc-z Join Date: Jul 2012 Location: Decatur, IL Posts: 249	Tracy wanted me to post up this calculator to aid in my question. http://www.wallaceracing.com/rockercalc.php Stock ls3/l99 LSA ratio is 1.7

06-01-2013, 10:13 AM	#6
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Do the calculations on your lift to make sure you would not be exceeding the 918's lift limits and they would be an awesome addition. The stability improvement over the stock valve train is substantial.

06-07-2013, 06:58 PM	#7
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Bump!!! Great affordable way to up your cams lift up AND improve the valvetrains stability.

06-10-2013, 03:15 PM	#8
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Still available

07-13-2013, 06:02 PM	#9
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	$450 shipped!!! Best price you will find for like new. L99 or LS3.

07-22-2013, 04:43 PM	#10
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Bump for a killer deal!