10-04-2014, 03:09 PM | #29 |
Drives: Red 2SS/RS M6 Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 6,219
|
Hi Don, under the outer panel (where you have your template) there is another panel, so removing the fender liner will not allow you to see or get to the under side of the outer panel.
lupe |
10-04-2014, 04:05 PM | #30 |
Drives: Red 2SS/RS M6 Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 6,219
|
Don, check out the 5th and 6th video on the first post
http://www.camaro5.com/forums/showth...86#post7989086 lupe |
10-04-2014, 04:24 PM | #31 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Thanks! I'm going to measure before I do any cuts. There is a junk yard with a banged up Gen5 I'm going to look @ to verify my measurements. Thanks for the heads up!
|
10-21-2014, 08:28 PM | #32 |
Drives: Red 2SS/RS M6 Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 6,219
|
Acs rear quarter panel ports?
|
|
|
Thread Tools | |
|
|