12-23-2009, 10:10 PM | #1 |
3800 intake manifold
ok so i had to change the heater bypass house under the plenum today but i guess i put the wrong end in and went to far. i ended up breaking it not meaning to but part of the end is still in there. so my questions is am i going to have to take the whole intake manifold off to get it out and if so what all do i need to do to replace the manifold gasket. i know it is different then doing the 3.4l but will i have to set all the rockers and everything?and how should i do the end gaskets on the intake manifold. all info is welcome. thanks
|
|
12-24-2009, 08:15 AM | #2 |
Account Suspended
Drives: GM Stuff Join Date: Sep 2009
Location: Panama City Beach, FL
Posts: 727
|
Nope. Most parts stores sell an extractor designed for such issues. Same one used on a SBC to remove corroded heater hose fittings.
|
12-24-2009, 08:32 AM | #3 |
well the peice got stuck in there were i cant get to it with anything
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
11/23 TPW Check-In Station!! | SS 376 | Camaro Price | Ordering | Tracking | Dealers Discussions | 930 | 04-11-2010 07:28 PM |
8.17.09 TPW VIN Thread.. | ThunderSS | Camaro Price | Ordering | Tracking | Dealers Discussions | 1794 | 10-12-2009 10:57 PM |
Check your Order here | bvonscott | Camaro Price | Ordering | Tracking | Dealers Discussions | 665 | 06-29-2009 01:00 PM |