Are these replicas the exact same size/bolt pattern/offsets as OEM?

[Steers]

Http://www.pinnaclecamaro.com/2010_2...p/fr-c101b.htm

Thanks! I just need to know if they're the correct size to fit my stock tires on my SS

Edit: Also, do I need to buy the sensors and whatnot for them also? (Sorry still learning!)

Edit2: I was looking at...

20x8 35mm offset (x2)
20x9 40mm offset (x2)

[Sir Nuke]

well the offsets are RIGHT. as far as the sensors go, you can use the ones in your current wheels.

as far as the bolt pattern goes....since they are FACTORY REPO's...they SHOULD be correct....what I would do is actually call them and see if you can get a TRUELY knowledgable person on the phone.....not just someone taking orders. The reason I ask that is because on their website is lists the bolt pattern as 5 x 4.75".....which is the OLD STANDARD CHEVY bolt pattern....our cars wheel bolt pattern is in reality 5 x 120 mm. which is a hair different. IF you can talk to someone that really knows his/hers product....they can most likely verify that they wheels are truely the SAME as the factory wheels which are 5 x 120 mm.....and not 5 4.75" as listed on their website.