The V6 Lounge - Page 308 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Wuiquen · 06-25-2013, 03:39 PM

So installed plenum spacer.. and I think I did great.. no problem when I fired her up.. searched for leaks.. all good to go.. no noises.. other than the breather sucking air.. lol..

PoorMansCamaro · 06-25-2013, 03:44 PM

Still lost on the whole plenum spacer thing.

lscamaro · 06-25-2013, 03:48 PM

Quote:

Originally Posted by PoorMansCamaro

Still lost on the whole plenum spacer thing.

I wouldn't do it

lscamaro · 06-25-2013, 04:51 PM

Can someone with an elite engineering catch can post a pic of their hose routing? Preferably driver side mounts

FireCracker · 06-25-2013, 04:57 PM

Okay everyone. I keep hearing about these "catch cans" found out what the purpose it and what not.. But is it something to get if you're already like 24,000 miles in without one?

lscamaro · 06-25-2013, 04:59 PM

Quote:

Originally Posted by FireCracker

Okay everyone. I keep hearing about these "catch cans" found out what the purpose it and what not.. But is it something to get if you're already like 24,000 miles in without one?

Yes, never too late to get one.

batman53201 · 06-25-2013, 05:00 PM

Quote:

Originally Posted by lscamaro

Can someone with an elite engineering catch can post a pic of their hose routing? Preferably driver side mounts

edit; sorry its a v8

FireCracker · 06-25-2013, 05:00 PM

Quote:

Originally Posted by lscamaro

Yes, never too late to get one.

Okay cool, thanks!

batman53201 · 06-25-2013, 05:00 PM

Quote:

Originally Posted by FireCracker

Okay everyone. I keep hearing about these "catch cans" found out what the purpose it and what not.. But is it something to get if you're already like 24,000 miles in without one?

never too late

menendez1293 · 06-25-2013, 08:13 PM

Quote:

Originally Posted by lscamaro

Can someone with an elite engineering catch can post a pic of their hose routing? Preferably driver side mounts

Here is my install. I know its not a driver side mount but it still will give you the idea of how the lines are going.

lscamaro · 06-25-2013, 08:15 PM

Did you use a specific DIY to install?

menendez1293 · 06-25-2013, 08:19 PM

Quote:

Originally Posted by lscamaro

Did you use a specific DIY to install?

I didn't. I had the Elite Directions to go by. I can see if I still have them and attach them so that you can see them.

Edit: I found the instructions. Let me try and upload the PDF

lscamaro · 06-25-2013, 08:21 PM

If you can that'd be great. We're they LLT specific? I found some online that showed an LFX. If those are the ones you used, I'll use those. I just didn't know if there were any differences in install from LLT to LFX

PoorMansCamaro · 06-25-2013, 08:23 PM

Quote:

Originally Posted by lscamaro

If you can that'd be great. We're they LLT specific? I found some online that showed an LFX. If those are the ones you used, I'll use those. I just didn't know if there were any differences in install from LLT to LFX

They should be exactly the same.

06-25-2013, 03:39 PM	#4299
Wuiquen Drives: 2018 Hot Red ZL1 Join Date: Nov 2010 Location: Los Angeles, CA Posts: 3,599	So installed plenum spacer.. and I think I did great.. no problem when I fired her up.. searched for leaks.. all good to go.. no noises.. other than the breather sucking air.. lol.. __________________

06-25-2013, 03:44 PM	#4300
PoorMansCamaro Drives: Really Slow Join Date: Apr 2010 Location: PA Posts: 56,959	Still lost on the whole plenum spacer thing. __________________

06-25-2013, 04:51 PM	#4302
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Can someone with an elite engineering catch can post a pic of their hose routing? Preferably driver side mounts __________________ Click Picture for Build Thread

06-25-2013, 08:15 PM	#4309
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Did you use a specific DIY to install? __________________ Click Picture for Build Thread

06-25-2013, 08:21 PM	#4311
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	If you can that'd be great. We're they LLT specific? I found some online that showed an LFX. If those are the ones you used, I'll use those. I just didn't know if there were any differences in install from LLT to LFX __________________ Click Picture for Build Thread

06-25-2013, 04:57 PM	#4303
FireCracker Banned Drives: a car Join Date: Jan 2013 Location: not where i wanna be :) Posts: 2,114	Okay everyone. I keep hearing about these "catch cans" found out what the purpose it and what not.. But is it something to get if you're already like 24,000 miles in without one?