Auxiliary Gages not working - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

flarehaze · 02-28-2010, 07:40 PM

Hi all. Has anybody else had this issue? I just noticed the other day that they are not reading at all. Not even when starting the vehicle. I'll see if I can take it by the dealership close to work.

Inspector 17 · 03-01-2010, 08:24 AM

Sounds like perhaps a blown fuse or a disconnected wire running to the gauges. Did they ever work? I would definitely swing by the dealer. Please keep us posted on what you find out.

clg_98ta · 03-01-2010, 09:03 AM

Sounds like the Aux gauges wiring connector came loose.

flarehaze · 03-06-2010, 02:16 PM

I'll be taking it in tomorrow. Gauges are still not working. I looked around the fuse box, but all fuses seem fine.

HeavyD · 03-06-2010, 07:18 PM

Only have 4 wires to gauge pack. Power, ground, Data + and Data -. If they don't light up with the dash lights, I would say no power, or a bad IC board in the gauge pack.

flarehaze · 03-07-2010, 12:56 PM

just got back from the dealer. tested all the fuses and all were fine. I finally found where my battery is

I'll look around one of those DIY gauge installs and try to pull mine apart. If not, I'll have to take it in again tomorrow.

clg_98ta · 03-07-2010, 06:45 PM

You mean the dealer could not find the problem? How hard could it be??

HeavyD · 03-07-2010, 07:29 PM

I could be very hard. If you don't have a second set to plug in to help diagnose, plus it is probably their first time diagnosing a problem like this, it can get hard.

02-28-2010, 07:40 PM	#1
flarehaze Drives: 2010 IOM/IOM Camaro 2SS Join Date: Jul 2009 Location: Miami, FL Posts: 138	Auxiliary Gages not working Hi all. Has anybody else had this issue? I just noticed the other day that they are not reading at all. Not even when starting the vehicle. I'll see if I can take it by the dealership close to work.

03-01-2010, 08:24 AM	#2
Inspector 17 I love crepes Drives: 2017 ZL1 NGM A10 Join Date: Oct 2008 Location: Maryland Posts: 4,955 View My Garage	Sounds like perhaps a blown fuse or a disconnected wire running to the gauges. Did they ever work? I would definitely swing by the dealer. Please keep us posted on what you find out. Last edited by Inspector 17; 03-01-2010 at 09:27 AM.

03-01-2010, 09:03 AM	#3
clg_98ta Drives: 2010 Camaro 2SS Join Date: Jan 2010 Location: Austin, TX Posts: 2,698 View My Garage	Sounds like the Aux gauges wiring connector came loose. __________________ Black 2SS ordered 1/4/2010, received 2/19/2010

03-07-2010, 06:45 PM	#7
clg_98ta Drives: 2010 Camaro 2SS Join Date: Jan 2010 Location: Austin, TX Posts: 2,698 View My Garage	You mean the dealer could not find the problem? How hard could it be?? __________________ Black 2SS ordered 1/4/2010, received 2/19/2010

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dash gauges not working and clicking noise	Tigerrag24	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	26	02-26-2013 02:16 PM
Remote Start not working and service engine light	StealthSS	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	6	02-20-2010 06:36 PM
RS Headlight stopped working	HaZe_X	5th Gen Camaro SS LS LT General Discussions	9	02-09-2010 10:30 PM
Remote lock feedback - not working properly?	mmarcum	5th Gen Camaro SS LS LT General Discussions	18	06-08-2009 03:28 PM
GM working on hybrid power plug-in for Saturn Vue	KILLER74Z28	General Automotive + Other Cars Discussion	0	11-29-2006 02:40 PM

03-06-2010, 02:16 PM	#4
flarehaze Drives: 2010 IOM/IOM Camaro 2SS Join Date: Jul 2009 Location: Miami, FL Posts: 138	I'll be taking it in tomorrow. Gauges are still not working. I looked around the fuse box, but all fuses seem fine.

03-06-2010, 07:18 PM	#5
HeavyD Drives: 1SSRS RY L99 Join Date: Aug 2009 Location: Ontario Posts: 1,329	Only have 4 wires to gauge pack. Power, ground, Data + and Data -. If they don't light up with the dash lights, I would say no power, or a bad IC board in the gauge pack.

03-07-2010, 12:56 PM	#6
flarehaze Drives: 2010 IOM/IOM Camaro 2SS Join Date: Jul 2009 Location: Miami, FL Posts: 138	just got back from the dealer. tested all the fuses and all were fine. I finally found where my battery is I'll look around one of those DIY gauge installs and try to pull mine apart. If not, I'll have to take it in again tomorrow.

03-07-2010, 07:29 PM	#8
HeavyD Drives: 1SSRS RY L99 Join Date: Aug 2009 Location: Ontario Posts: 1,329	I could be very hard. If you don't have a second set to plug in to help diagnose, plus it is probably their first time diagnosing a problem like this, it can get hard.