Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Members Classifieds - Parts for sale or wanted > Forced Induction


Reply
 
Thread Tools
Old 04-04-2013, 06:47 PM   #1
Blevinator
 
Drives: 1968 Camaro LS3
Join Date: May 2011
Location: San Antonio Texas
Posts: 30
52lb Eforce fuel injectors Low miles

Less than 7k miles on these Siemens 52lb injectors.
I am going with a smaller pulley and 65lb injectors.
These came off my Edelbrock Camaro SS kit.

$210 shipped!!!!

Last edited by Blevinator; 06-20-2013 at 02:44 PM.
Blevinator is offline   Reply With Quote
Old 04-04-2013, 07:02 PM   #2
Supermaro585HP
Account Suspended
 
Drives: 2011 Camaro SS RS
Join Date: Aug 2011
Location: Pittsburgh, PA
Posts: 1,186
What size pulley are you going with??? I put a 3" on mine with 60lb injectors. I also put a ZL1 fuel pump. I never thought about selling my old injectors. I let the shop keep them. PM me with your build.. Good luck with the sale!!!
Supermaro585HP is offline   Reply With Quote
Old 04-04-2013, 08:06 PM   #3
Blevinator
 
Drives: 1968 Camaro LS3
Join Date: May 2011
Location: San Antonio Texas
Posts: 30
Not sure which pulley
Looking for 650 rwhp
Heres my build:
http://www.pro-touring.com/showthrea...ro-LS3-Project
Blevinator is offline   Reply With Quote
Old 04-11-2013, 03:53 PM   #4
Mkn95u0
 
Mkn95u0's Avatar
 
Drives: 2012 IBM L99
Join Date: Feb 2012
Location: Southern California
Posts: 484
Are you swapping your belt & pulley? if so, do you have the 3.5" pulley? i'll take the belt & pulley off your hands if you're willing. pm me a price if you're interested... not quite sure what they go for elsewhere

my edlebrock sc came with a 3.875" pulley, been looking for a 3.5" or 3.4" (been told thats pretty much the max i can go without forged internals)
__________________
Robert
12.012 @ 115.75mph DA: 2371 | 486rwhp/467rwtq (11/8/2015)M
11.265 @ 123.55mph DA: 2318 | 526rwhp/532rwtq (11/19/2016)M
10.722 @ 132.21mph DA: 850 | 645rwhp/581rwtq (12/3/2017)M
10.609 @ 130.19 DA: 975 | 675rwhp/629rwtq (2/16/2020)D
Build: E-Force w/ 3.25" pulley (11lbs of boost), 10% OD under pulley, Fore Dual Fuel System, ID850's, AEM CAI, Borla Long Tubes, Flowmaster Super 10's, Circle D 3200 converter 258mm triple disc lockup, cam 226/242 116+4 LSA, ZL-1 Rear end, E85 & BRC Raceworks Tune (previously known as CMS)
Youtube Channel: http://www.youtube.com/c/RobertMitchellRCM

Mkn95u0 is offline   Reply With Quote
Old 04-11-2013, 07:05 PM   #5
Blevinator
 
Drives: 1968 Camaro LS3
Join Date: May 2011
Location: San Antonio Texas
Posts: 30
Quote:
Originally Posted by Mkn95u0 View Post
Are you swapping your belt & pulley? if so, do you have the 3.5" pulley? i'll take the belt & pulley off your hands if you're willing. pm me a price if you're interested... not quite sure what they go for elsewhere

my edlebrock sc came with a 3.875" pulley, been looking for a 3.5" or 3.4" (been told thats pretty much the max i can go without forged internals)

I have the stock pulley, will have to check on the size. I know it is stock as it has the DO NOT remove sticker on it.

If you have an LS3, stock internals along with headers,exhaust,and dyno tune should hold 650rwhp ALL DAY LONG. just do ARP bolts to make sure nothing comes loose! Running meth injection also helps ALOT!
Blevinator is offline   Reply With Quote
Old 04-12-2013, 10:59 AM   #6
Mkn95u0
 
Mkn95u0's Avatar
 
Drives: 2012 IBM L99
Join Date: Feb 2012
Location: Southern California
Posts: 484
Quote:
Originally Posted by Blevinator View Post
I have the stock pulley, will have to check on the size. I know it is stock as it has the DO NOT remove sticker on it.

If you have an LS3, stock internals along with headers,exhaust,and dyno tune should hold 650rwhp ALL DAY LONG. just do ARP bolts to make sure nothing comes loose! Running meth injection also helps ALOT!
I think i'm gonna do some more research, i've been told getting up to 570rwhp on the L99 with out forged internals is about the max it can handle by 2 tune shops and a manager in the parts department for edlebrock... another 80rwhp is quite a significant increase, unless the L99 isn't built to handle as much as the LS3? this i dont know... going through the forums, it just turns into a pissing match rather than factual information about how the two motors differ other than vvt and afm.

I'm also not sure what meth injection is, still kinda new to all of this.

But what i do know is the L99 SC from edlebrock comes with a 3.875" pulley, where as the LS3 kit comes with a 3.5" - so if you're willing to part with it, i'd definately like to know.
__________________
Robert
12.012 @ 115.75mph DA: 2371 | 486rwhp/467rwtq (11/8/2015)M
11.265 @ 123.55mph DA: 2318 | 526rwhp/532rwtq (11/19/2016)M
10.722 @ 132.21mph DA: 850 | 645rwhp/581rwtq (12/3/2017)M
10.609 @ 130.19 DA: 975 | 675rwhp/629rwtq (2/16/2020)D
Build: E-Force w/ 3.25" pulley (11lbs of boost), 10% OD under pulley, Fore Dual Fuel System, ID850's, AEM CAI, Borla Long Tubes, Flowmaster Super 10's, Circle D 3200 converter 258mm triple disc lockup, cam 226/242 116+4 LSA, ZL-1 Rear end, E85 & BRC Raceworks Tune (previously known as CMS)
Youtube Channel: http://www.youtube.com/c/RobertMitchellRCM

Mkn95u0 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:16 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.