03-21-2014, 07:02 AM | #1 |
Drives: 2014 2SS/RS 6M Join Date: Mar 2010
Location: fort worth
Posts: 438
|
Heat shield rattle after SLP Header package!
I have just installed the SLP header package and was wondering what you guys used to quiet the heat shields....Could anyone direct me to a fix?
Possibly Dyno mat? |
03-23-2014, 03:34 PM | #2 |
I have the same thing. Driving me crazy! I did go back and make sure the O2 connectors weren't causing it. Really bad in parking lots or any RPM that might cause bucking. If I find it I'll let you know
Where are you going to get your tune done? |
|
03-23-2014, 03:43 PM | #3 |
Drives: 2015 Z/28 #533 Join Date: Jul 2012
Location: NY
Posts: 6,731
|
Make sure it is actually the heat shield. I had a rattle that was caused by a screw from the frame hitting the header on the passenger side.
|
03-23-2014, 04:43 PM | #4 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Pull the heat shield
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
03-28-2014, 09:42 AM | #5 | |
Drives: 2014 2SS/RS 6M Join Date: Mar 2010
Location: fort worth
Posts: 438
|
Quote:
Yeah I knocked down the screw on the pass. side when I installed! Didnt want to mess up ther coat....but the noise is from the shifter area, mainly hear it when im in first gear at times. The header to the high flow cat cuts it close to the body. |
|
03-28-2014, 10:51 AM | #6 |
Drives: 2011 Synergy Green 2SS/RS Camaro Join Date: Jan 2011
Location: Mount Pleasant, PA
Posts: 171
|
My rattle came from the cross over under the car. The pipes were laying on it and making all kinds of noise. Grabiak Chevy put some washers under the pan thus lowering it down and now all is OK. I have the SLP LT headers with high flow cats and full SLP exhaust.
|
03-30-2014, 01:28 AM | #7 |
Drives: 2021 2SS 1le Shock Join Date: Feb 2011
Location: Mid-West
Posts: 198
|
After adding headers and catback , had ratteling noise, sounded like a heat sheild was loose or hitting, o2 sensors were loose. easy fix tighten sensors ratteling stopped.
__________________
A10, Navigation, Sunroof, Illuminated bow tie, 30% tint, GM Splash guards, GM Strut brace, GM CAI, Illuminated foot wells, Wicker bill, BLK GM Camaro fender badge, GM Fuel door w/ Carbon fiber inserts.
|
|
|
|
|