Big Worm Graphix install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MrTwenty6 · 12-05-2017, 02:46 PM

Anyone here have any experience with installing the Big Worm tints?

I recently ordered a set (full tint less headlights) and basically completely messed up the rear tail light install. I reviewed the tutorial on youtube and instructions, seemed straight forward. The indicators and 3rd brake light went on no problem.

The driver side rear- The tint itself seemed to be off; there were some significant gaps in coverage that I couldn't align correctly with the tail light. I think the idea is to stretch the material to give full coverage but I must have screwed it up. The heat that I applied ended up stretching the material too much and it just didn't fit. I ended having to scrap it. I have the passenger side still.

Before I screw that up again, do you all have any tips or something? I'm kinda annoyed that i'll have to buy 1 tail light piece again but it is what it is.

The camaro show · 12-05-2017, 04:06 PM

Yes I did mine from big worm graphix is your car a rs pkg or none rs

MrTwenty6 · 12-06-2017, 01:01 PM

Quote:

Originally Posted by The camaro show

Yes I did mine from big worm graphix is your car a rs pkg or none rs

The RS tail light.

I will take some mock up pictures later this week when I try the passenger side.

bigwormgraphix · 12-07-2017, 10:02 AM

Give us a call and you can talk to our installer, he has been installing those since 2014 and has done a lot of them. Were here 9 am to 5 pm (central time) Monday thru Friday. 817-876-2269

12-05-2017, 02:46 PM	#1
MrTwenty6 Drives: 2014 Camaro SS 1LE Join Date: Mar 2017 Location: MD Posts: 45 View My Garage	Big Worm Graphix install Anyone here have any experience with installing the Big Worm tints? I recently ordered a set (full tint less headlights) and basically completely messed up the rear tail light install. I reviewed the tutorial on youtube and instructions, seemed straight forward. The indicators and 3rd brake light went on no problem. The driver side rear- The tint itself seemed to be off; there were some significant gaps in coverage that I couldn't align correctly with the tail light. I think the idea is to stretch the material to give full coverage but I must have screwed it up. The heat that I applied ended up stretching the material too much and it just didn't fit. I ended having to scrap it. I have the passenger side still. Before I screw that up again, do you all have any tips or something? I'm kinda annoyed that i'll have to buy 1 tail light piece again but it is what it is.

12-05-2017, 04:06 PM	#2
The camaro show Drives: 2015 camaro 2lt Join Date: Dec 2016 Location: Northern West Virginia Posts: 925	Yes I did mine from big worm graphix is your car a rs pkg or none rs __________________ Cosmetic mods: SS hood with painted vent, SS bumper, acs 1le front lip black, big worm gfx tinted all lights, solar wing v2, Camaro seat belt pads and oracle color shift halos and fog light halos and rear colorshift bow tie, carbon creations carbon fiber stingray z spoiler Wheels: lexani r-3 bg finish 19x8.5 Performance: cold air inductions intake, mrt v1, jacfab ported intake manifold, intake manifold spacer, overkill tuned on E85.

12-07-2017, 10:02 AM	#4
bigwormgraphix Account Suspended Drives: 1991 Z28, 2015 SS & 2017 SS Join Date: Aug 2009 Location: Fort Worth, Tx Posts: 800	Give us a call and you can talk to our installer, he has been installing those since 2014 and has done a lot of them. Were here 9 am to 5 pm (central time) Monday thru Friday. 817-876-2269