01-23-2014, 04:32 PM | #15 |
Drives: Love the one you're with Join Date: Sep 2009
Location: Downtown Charlie Brown
Posts: 11,850
|
Not sure if it's been mentioned above, but your better two stage compressors allow for higher air pressure. This allows for running better air tools at higher pressures to give you the power to break tight bolts. Most cheaper two stage compressors still only go to just above 100psi. Also when talking real Hp instead of "advertised" a two Hp motor is the biggest you will run on a 20 amp 110v circuit without tripping breakers. This is why 110 units are just toys for any kind of real garage work. If you want to run a nailer or do small projects they are fine.
My suggest would be to get a good professional two stage in the 5hp range. If you can afford to buy high end wheels and superchargers you should be able to afford a good compressor. Lol |
01-23-2014, 05:03 PM | #16 |
ROAD COURSE JUNKIE
|
You are right PQ. Another member said already quality air tools makes a huge difference. I have no problem with my 30 gallon compressor and good air tools.
__________________
|
01-23-2014, 05:13 PM | #17 |
Drives: the 2nd amendment home Join Date: May 2008
Location: OK
Posts: 14,707
|
As far as couplers, (quick connects) Milton brass 1/4" is what dad always used, and they were pretty durable. 1/4" couplers with 3/8 hose and 1/4" fitting ends should give all the volume you need.
Not all couplers are exactly the same, make sure you get matching males & females. Most smaller air tools are 1/4 npt, including your air ratchet, unless you have a superduper high torque model. Also, don't skimp on your air line, I bought some Chinese craponacracker hose that cracked & leaked in less than a year. ....
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin |
01-23-2014, 08:11 PM | #18 | ||||
Booooosted.
|
Quote:
Quote:
The plan is to move in the next couple of years from this house but I will still run the wires if needed. Quote:
Quote:
|
||||
01-23-2014, 08:21 PM | #19 |
Drives: Love the one you're with Join Date: Sep 2009
Location: Downtown Charlie Brown
Posts: 11,850
|
|
01-23-2014, 08:22 PM | #20 |
Booooosted.
|
You mean I shouldn't tape a bunch of straws together and use that?
|
01-23-2014, 08:30 PM | #21 |
Drives: Love the one you're with Join Date: Sep 2009
Location: Downtown Charlie Brown
Posts: 11,850
|
|
01-23-2014, 10:06 PM | #22 |
Drives: the 2nd amendment home Join Date: May 2008
Location: OK
Posts: 14,707
|
You could just BLOWHARD.....
Wouldn't even need a compressor Try this, let me know how it works http://www.rockler.com/flexzillareg-...ngths-air-hose You guys were talking about connectors and what-not doohicky things in the other thread, didn't know if it was covered or not.
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin |
01-23-2014, 10:20 PM | #23 |
Drives: 2021 Crush ZL1 1LE Join Date: Oct 2009
Location: Sierra Vista, AZ
Posts: 1,119
|
Just my 2 cents.
Air compressor - big volume and quick recovery. You may decide you may want to paint or air sand an entire vehicle some day. I was lucky and inherited mine from my Dad's diesel shop. Must be 40 years old, but still strong with regular maintenance. Noise - If you end up running power, I would recommend building a noise insulated dog house in or out of your shop. Much more pleasant for the operator. Dry air - Get an air dryer for the life of your tools. Mo is better for any type of painting or tool life. I live in AZ, but the air tank still builds up water. Hoses - NAPA paint hose work for me for general use. Kink proof and durable. But I make sure I keep the true paint hoses oil/contaminant free. Tools - I've had my Chicago Pneumatic 3/4 air wrench for 20 plus years. Rated for more torque than most and still running strong. My Dad's one got away from me over the years, but its still in operation after 35 years. Just keep them oiled and dry.
__________________
2021 Crush ZL1 1LE |
01-23-2014, 10:31 PM | #24 |
Drives: 2021 Crush ZL1 1LE Join Date: Oct 2009
Location: Sierra Vista, AZ
Posts: 1,119
|
Just for fun - check out an air nibbler and a "zip gun" (aka air hammer). Zip gun makes short work of stodgy bolts and concrete if needed. Zip gun has saved from firing up the torch on several occasions. Nibbler makes short work of shaping aluminum.
Your post just reminded me that I need to get my toys out and lube them up.
__________________
2021 Crush ZL1 1LE |
01-23-2014, 11:15 PM | #25 | |||
Booooosted.
|
Quote:
Quote:
Quote:
Ya, I will be buying a paint gun soon. I have a few projects I'll be working on and I was told that the last thing you want is for the tool to get low and sputter. |
|||
01-24-2014, 12:07 PM | #26 |
ROAD COURSE JUNKIE
|
Then you should really go with a 60 or 80 for painting, unless you are doing very small pieces. Make sure to get some good filters so there is no moisture in your pain.
__________________
|
01-24-2014, 06:37 PM | #27 |
Drives: the 2nd amendment home Join Date: May 2008
Location: OK
Posts: 14,707
|
That's what she said
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin |
01-24-2014, 09:18 PM | #28 |
Booooosted.
|
lol
Good tip. I will. |
|
|
|
|