~Mid-Florida Camaro Club~MFCC

[Fallout]

Congrats Phil and when is the next track day so I can finally run this car?

[Modern07]

Originally Posted by Fallout

Congrats Phil and when is the next track day so I can finally run this car?

Thanks - and my next track day will be after I get a new clutch installed - the Stock one finally gave up the ghost at the track on Thursday night - now I can't give the car any power at all without the clutch slipping...in all gears

Thinking I'm going to go with the McLeod RXT Street Twin which is rated to 1,000hp

[Fallout]

Read up twin disk can be rough, made the ride much different and annoyed me greatly. Which is why I decided on the 4L80 which is amazing. Hp dropped from 741 to about 630 with the new tranny lol.

[Modern07]

Originally Posted by Fallout

Read up twin disk can be rough, made the ride much different and annoyed me greatly. Which is why I decided on the 4L80 which is amazing. Hp dropped from 741 to about 630 with the new tranny lol.

Which twin did you go with?

Everything I've read about the McLeod says it drives and feels much better than stock but holds the power - that's why I'm thinking that one

And OUCH on the hp loss!

[LnLSS]

Interesting msg on the facebook page:

Just wanted to let you know I will have a Red 2014 Camaro Z/28 (w/AC) here on the ground this week. If you know anyone who wants to see one in person or would be interested in purchasing, please have them contact me at (407)933-8000

Scott Shevlin
Starling Chevrolet

[joes407]

Originally Posted by LnLSS

Interesting msg on the facebook page:

Just wanted to let you know I will have a Red 2014 Camaro Z/28 (w/AC) here on the ground this week. If you know anyone who wants to see one in person or would be interested in purchasing, please have them contact me at (407)933-8000

Scott Shevlin
Starling Chevrolet

Personnally im done with starling!

[joes407]

Originally Posted by Fallout

Read up twin disk can be rough, made the ride much different and annoyed me greatly. Which is why I decided on the 4L80 which is amazing. Hp dropped from 741 to about 630 with the new tranny lol.

I believe we already have twin disc from factory.

[joes407]

Originally Posted by Fallout

Congrats Phil and when is the next track day so I can finally run this car?

Im almost ready to get some times with my new red hot z! Got a couple things I need to iron out with the aftermarket suspension first but I think I will handle that this week. Who ever installed it did it red neck style marking everything with a sharpie and puttin it back together leaving the rear off center by about an inch. When I really get in it the car raises in the air and tries to pull me off the road. Took me all day saturday to figure out the problem

[Modern07]

Originally Posted by joes407

Im almost ready to get some times with my new red hot z! Got a couple things I need to iron out with the aftermarket suspension first but I think I will handle that this week. Who ever installed it did it red neck style marking everything with a sharpie and puttin it back together leaving the rear off center by about an inch. When I really get in it the car raises in the air and tries to pull me off the road. Took me all day saturday to figure out the problem

Aftermarket Suspension?

Why would anybody mess with the MRC on a ZL1?

What system is it?

[joes407]

Originally Posted by Modern07

Aftermarket Suspension?

Why would anybody mess with the MRC on a ZL1?

What system is it?

Not the magnetics just parts around them.

[Modern07]

Ahhh gotcha - looks like the BMR kit - I have that on my car - really helped me to get the power to the floor

[Raul_Fury]

Who's doing the winghouse cruise in before the meeting?

[Modern07]

Well I'm out altogether as I'll be in California until late Sunday evening

[joes407]

Originally Posted by Modern07

Ahhh gotcha - looks like the BMR kit - I have that on my car - really helped me to get the power to the floor

Probly the drag radials doin that. Lol