New throttle body spacer from Vararam - my thoughts... - Page 48 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Coyotekiller · 07-16-2012, 08:29 AM

Quote:

Originally Posted by Camper

Yea i have the fastlane pipeline, i guess we'll find out! Ill let you know how it goes.

We have a local dyno day coming up. Maybe I'll get the pipeline on in time for that....

Falundir · 07-16-2012, 12:13 PM

Let's change the tone of this thread from 'when will it come out' to 'when will we receive it'

SIMSS · 07-16-2012, 12:15 PM

I called last week and was told that the wedges should ship out Today or Tuesday.

SC2150 · 07-16-2012, 12:18 PM

Install the pipeline AT the dyno day so you have before and after runs...you need 3 runs each to average it out.

My only beef with VRam is I have shared data and findings with them for years, I offer to send them free product to improve their designs or my findings to help them....and they do not even have the courtesy to take 30 seconds to reply.

Just look at the breather they throw on the LLT V6 CAI...it is illegal in all 50 states, throws off fuel trims. yet they seem to care less that the company that has done more research, developed more products, and probably knows more about the LLT than any other in the US is offering to share data FREE to improve their products.

So, as you can see I still am giving them support on this product, urging all to be patient, and their money back guarantee you have nothing to loose to try this.....but I could not imagine ignoring someones email/PM's. Even if they are arrogant to think they have all the answers, it only takes a minute or less to hit reply.

E.T. · 07-16-2012, 12:25 PM

Quote:

Originally Posted by SC2150

Install the pipeline AT the dyno day so you have before and after runs...you need 3 runs each to average it out.

My only beef with VRam is I have shared data and findings with them for years, I offer to send them free product to improve their designs or my findings to help them....and they do not even have the courtesy to take 30 seconds to reply.

Just look at the breather they throw on the LLT V6 CAI...it is illegal in all 50 states, throws off fuel trims. yet they seem to care less that the company that has done more research, developed more products, and probably knows more about the LLT than any other in the US is offering to share data FREE to improve their products.

So, as you can see I still am giving them support on this product, urging all to be patient, and their money back guarantee you have nothing to loose to try this.....but I could not imagine ignoring someones email/PM's. Even if they are arrogant to think they have all the answers, it only takes a minute or less to hit reply.

HUGE pet peeve of mine also...I can't stand when someone can't take 2 seconds to reply to an email.

Coyotekiller · 07-16-2012, 01:09 PM

Quote:

Originally Posted by SC2150

Install the pipeline AT the dyno day so you have before and after runs...you need 3 runs each to average it out.

My only beef with VRam is I have shared data and findings with them for years, I offer to send them free product to improve their designs or my findings to help them....and they do not even have the courtesy to take 30 seconds to reply.

Just look at the breather they throw on the LLT V6 CAI...it is illegal in all 50 states, throws off fuel trims. yet they seem to care less that the company that has done more research, developed more products, and probably knows more about the LLT than any other in the US is offering to share data FREE to improve their products.

So, as you can see I still am giving them support on this product, urging all to be patient, and their money back guarantee you have nothing to loose to try this.....but I could not imagine ignoring someones email/PM's. Even if they are arrogant to think they have all the answers, it only takes a minute or less to hit reply.

I'm gonna probably dyno tune it anyway but it won't be at the dyno day. I think it's gonna be pretty much a one run and done kinda event, maybe two pulls and take the best. I'm not sure. I'll be doing my tuning elsewhere. I find the shop hosting the dyno day to be too incompetent to work on my car so the actual dyno tune for me is gonna be done at another speed shop.

crazysyrian720 · 07-17-2012, 12:26 AM

would the wedge work with a K&N Typhoon?

Rhino79 · 07-17-2012, 06:32 AM

Guys, it will work with any cai, its only an 1/8" thick.

Camarowguy · 07-17-2012, 04:47 PM

Anyone get one yet?!

Coyotekiller · 07-17-2012, 04:51 PM

Quote:

Originally Posted by Camarowguy

Anyone get one yet?!

They probably still haven't shipped them lol.

Falundir · 07-17-2012, 06:03 PM

Ordered last week and they haven't billed my credit card yet...

IndeedSS1 · 07-17-2012, 06:28 PM

Quote:

Originally Posted by Falundir

Ordered last week and they haven't billed my credit card yet...

I would say that they haven't shipped yet. As I recall they won't charge until it's ready to go out the door. I prefer this practice versus those that charge and sit on your money.

Camarowguy · 07-17-2012, 08:14 PM

Quote:

Originally Posted by IndeedSS1

I would say that they haven't shipped yet. As I recall they won't charge until it's ready to go out the door. I prefer this practice versus those that charge and sit on your money.

I'd prefer them to take my money, if they don't, I'll spend it.

IndeedSS1 · 07-17-2012, 08:28 PM

Quote:

Originally Posted by Camarowguy

I'd prefer them to take my money, if they don't, I'll spend it.

Good point.

07-17-2012, 04:47 PM	#667
Camarowguy Drives: 2011 imperial blue SS, black 92 RS Join Date: Apr 2011 Location: Denham Springs Posts: 2,580	Anyone get one yet?! __________________ 2011 imperial blue SS/RS a6 12.43@112 vararam, tune, jba cats, magnaflow axle back, self ported tb, under drive pulley, NO headers, Stock tires. 1.87 60ft. Stock tires. SOLD :( 2000 1500 silverado extra cab SOLD :( 2017 Silverado 5.3 all stock 2004 5.7 GTO 78mm turbo

07-16-2012, 12:13 PM	#660
Falundir Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011 Location: East Bay Posts: 2,189 View My Garage	Let's change the tone of this thread from 'when will it come out' to 'when will we receive it'

07-16-2012, 12:15 PM	#661
SIMSS Drives: SIM Join Date: Jun 2010 Location: Va Posts: 138	I called last week and was told that the wedges should ship out Today or Tuesday.

07-16-2012, 12:18 PM	#662
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Install the pipeline AT the dyno day so you have before and after runs...you need 3 runs each to average it out. My only beef with VRam is I have shared data and findings with them for years, I offer to send them free product to improve their designs or my findings to help them....and they do not even have the courtesy to take 30 seconds to reply. Just look at the breather they throw on the LLT V6 CAI...it is illegal in all 50 states, throws off fuel trims. yet they seem to care less that the company that has done more research, developed more products, and probably knows more about the LLT than any other in the US is offering to share data FREE to improve their products. So, as you can see I still am giving them support on this product, urging all to be patient, and their money back guarantee you have nothing to loose to try this.....but I could not imagine ignoring someones email/PM's. Even if they are arrogant to think they have all the answers, it only takes a minute or less to hit reply.

07-17-2012, 12:26 AM	#665
crazysyrian720 Drives: SS Join Date: Mar 2011 Location: los angeles Posts: 27 View My Garage	would the wedge work with a K&N Typhoon?

07-17-2012, 06:32 AM	#666
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	Guys, it will work with any cai, its only an 1/8" thick.

07-17-2012, 06:03 PM	#669
Falundir Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011 Location: East Bay Posts: 2,189 View My Garage	Ordered last week and they haven't billed my credit card yet...