Stabilitrak issues - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Becustom · 03-30-2011, 10:50 AM

I just had a procharger installed and dyno tuned , Now when under a hard run the service stabilitrak flashes in the speedo area.
Anyone esle have this issue ?

Thanks

JANNETTYRACING · 03-31-2011, 08:06 AM

Quote:

Originally Posted by Becustom

I just had a procharger installed and dyno tuned , Now when under a hard run the service stabilitrak flashes in the speedo area.
Anyone esle have this issue ?

Thanks

Are these your ONLY mods or did you do something else in the suspension or wheels and tires.

Is your car spinning the tires when it does this?

Ted.

acowherd · 03-31-2011, 08:18 AM

I have had this happen to me as well. I never could figure out why. Car resets its self when you go to start it the next time.

Oh...and in my case I am running nto5r, so I am not spinning.

Cam 427 · 03-31-2011, 11:21 AM

I've had "Service Stabilitrack" come on for a few seconds at a time usually when the ECM thinks it detected random misfires. Supposedly, misfire will disable the stabilitrack system. But, I can't detect or feel any misfires.

DSX · 03-31-2011, 11:50 AM

There are diagnostics you can turn off to prevent this from happening.

acowherd · 03-31-2011, 10:45 PM

Quote:

Originally Posted by DSX

There are diagnostics you can turn off to prevent this from happening.

And those are???

Does it turn stabilitrak off? I still want it to be active, so if my wife takes the car she can have all the nannies on.

Becustom · 04-01-2011, 07:08 AM

I have done other mods ,But this didn't start happening until the Procharger was installed .
It's not spinning because it happens at over 100 and beyond .
Thanks

Becustom · 04-01-2011, 07:48 PM

When you run it hard the stabilitrak will flash and go off . But if you do it a few times then the service engine light comes on with code PO108 map sensor.
Any ideas why ?

SUX2BU · 04-01-2011, 08:05 PM

Quote:

Originally Posted by Cam 427

I've had "Service Stabilitrack" come on for a few seconds at a time usually when the ECM thinks it detected random misfires. Supposedly, misfire will disable the stabilitrack system. But, I can't detect or feel any misfires.

This is true. After I got done with a bunch of my installs I accidentally left a plug wire unplugged and it kept flashing "service stabilitrack".

JANNETTYRACING · 04-02-2011, 07:33 AM

Quote:

Originally Posted by Becustom

When you run it hard the stabilitrak will flash and go off . But if you do it a few times then the service engine light comes on with code PO108 map sensor.
Any ideas why ?

It is in the Tune!

Please revisit your tuner or get someone else to tune it who has experience with Supercharged Gen5 Camaros.

Ted.

Becustom · 04-02-2011, 08:12 AM

Thanks Ted .

DSX · 04-02-2011, 09:21 AM

Quote:

Originally Posted by acowherd

And those are???

Does it turn stabilitrak off? I still want it to be active, so if my wife takes the car she can have all the nannies on.

I can't spoon feed everything!

No, it won't turn off stabilitrak. The problem the OP is describing is from the engine moving way more air than the PCM thinks it should.

NiNoDuKEz · 04-02-2011, 01:10 PM

i have a maggie 2300 on my l99 and under hard acceleration and i break the tires loose, my traction/stabilitrak will flash for a few moments and reset it self, my tuner said its just calibrating itself after a hard launch based on some sensors.
i'd love to hear from Jannetty on this one.

JANNETTYRACING · 04-04-2011, 09:01 AM

Quote:

Originally Posted by NiNoDuKEz

i have a maggie 2300 on my l99 and under hard acceleration and i break the tires loose, my traction/stabilitrak will flash for a few moments and reset it self, my tuner said its just calibrating itself after a hard launch based on some sensors.
i'd love to hear from Jannetty on this one.

Try holding the Traction control button down for 8 seconds then see if you can replicate the flashing stabiltrac light.

Ted.

03-30-2011, 10:50 AM	#1
Becustom ProCharged 600 + RWHP Drives: 2SS/RS White/Hugger Orange Join Date: Aug 2009 Location: MI Posts: 174	Stabilitrak issues I just had a procharger installed and dyno tuned , Now when under a hard run the service stabilitrak flashes in the speedo area. Anyone esle have this issue ? Thanks __________________ Thanks , Nyle http://wingsautoart.com www.youtube.com/user/Becustom

03-31-2011, 08:18 AM	#3
acowherd Drives: 2010 2ss/RS 4l80. 2009 2500 HD Join Date: Mar 2009 Location: Mid MO Posts: 1,826	I have had this happen to me as well. I never could figure out why. Car resets its self when you go to start it the next time. Oh...and in my case I am running nto5r, so I am not spinning. __________________ Follow along as we build and race this 2010 Camaro! https://www.facebook.com/pages/FNSS-...75028626000379 FNSS Racing!

04-01-2011, 07:08 AM	#7
Becustom ProCharged 600 + RWHP Drives: 2SS/RS White/Hugger Orange Join Date: Aug 2009 Location: MI Posts: 174	I have done other mods ,But this didn't start happening until the Procharger was installed . It's not spinning because it happens at over 100 and beyond . Thanks __________________ Thanks , Nyle http://wingsautoart.com www.youtube.com/user/Becustom

04-01-2011, 07:48 PM	#8
Becustom ProCharged 600 + RWHP Drives: 2SS/RS White/Hugger Orange Join Date: Aug 2009 Location: MI Posts: 174	When you run it hard the stabilitrak will flash and go off . But if you do it a few times then the service engine light comes on with code PO108 map sensor. Any ideas why ? __________________ Thanks , Nyle http://wingsautoart.com www.youtube.com/user/Becustom

04-02-2011, 08:12 AM	#11
Becustom ProCharged 600 + RWHP Drives: 2SS/RS White/Hugger Orange Join Date: Aug 2009 Location: MI Posts: 174	Thanks Ted . __________________ Thanks , Nyle http://wingsautoart.com www.youtube.com/user/Becustom

03-31-2011, 11:21 AM	#4
Cam 427 Drives: 2010 2SS Join Date: Apr 2010 Location: Washington Posts: 677	I've had "Service Stabilitrack" come on for a few seconds at a time usually when the ECM thinks it detected random misfires. Supposedly, misfire will disable the stabilitrack system. But, I can't detect or feel any misfires.

03-31-2011, 11:50 AM	#5
DSX Account Suspended Drives: 2006 Z06 Join Date: Oct 2010 Location: St. Louis, MO Posts: 145	There are diagnostics you can turn off to prevent this from happening.

04-02-2011, 01:10 PM	#13
NiNoDuKEz Drives: 2011 Camaro 2SS Wht/IOM Stripes Join Date: Aug 2010 Location: Los Angeles CA Posts: 69	i have a maggie 2300 on my l99 and under hard acceleration and i break the tires loose, my traction/stabilitrak will flash for a few moments and reset it self, my tuner said its just calibrating itself after a hard launch based on some sensors. i'd love to hear from Jannetty on this one.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM doesn't care about my clutch issues	O2BQIK	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	200	07-05-2012 01:23 AM
So apparently an aftermarket CAI breaks StabiliTrak... who knew?	Lazerbrainz2k3	5th Gen Camaro SS LS LT General Discussions	21	03-30-2011 11:58 AM
Camaro 2010 Issues	Tim's.2010.Camaro.SS	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	57	06-04-2010 09:27 AM
Sansa e260 issues	Laserjen	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	5	11-03-2009 10:28 PM