06-22-2009, 11:35 AM | #1 |
Drives: 2SS w/ ZZ427 Package!! Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 2,700
|
VECTOR Motorsports / ZZ Motorsports Stage II Camaro Package Completed !!
Vector Motorsports in Clinton Township, Michigan....in conjunction with ZZ Motorsports in Pittsburgh, PA, has completed development and testing of their first 2010 Camaro Stage II system.
The Stage II kit was developed to offer LS3 owners a cost effective way to dramatically increase HP and Torque, while maintaining the streetability of daily driver. The Stage II kit includes: Custom Grind Billet Core Stage II Camshaft Comp Pushrods PSI Valve Springs Custom Ported Intake Manifold Rotofab Cold Air Intake 1 3/4 Kooks Headers (your choice of Catted or Offroad X-pipe) As shown below, Dyno Testing proved a 106 HP increase at the rear wheels!! And drastically increased Torque across the RPM range. All testing and tuning was done on Vector's in house Mustang Dyno The full kit is priced VERY competitively, and is the best "bang for your buck" available for the Camaro. If you want to see what this car can do, here is a brief look at a video of the car while tuning on the dyno: Here is a copy of the dyno results: This is a copy of detailed dyno results, and is highlighted with notes which show the improvement over the baseline numbers: Yes that is right, this includes a Roto-Fab intake...The very first Roto-Fab CAI to be dynoed was tested on this car. Roto-Fab will have the pleasure of giving you those results, but let's just say it worked awesome, looked amazing, and fit perfectly! For those of you who want to hear what this cam sounds like....here you go!! This is with the factory mufflers still installed... We did test the car with other muffler combinations, and the factory mufflers will support this power without any modifications, if you want a different sound you can change the mufflers, but the HP gains remained the same. Here are some other photos from the build and testing phase of this project: From being the owner of the first car to have this package installed , I can say it runs, sounds, and looks amazing!!! At car cruises people flock to this car and love the sound. On my 5 hour trip home from the install I average 23.6 MPG all the way across the state of Ohio!! That is amazing when you consider the power that this car is producing! A huge thanks goes out the Vector Motorsports for getting this project completed so quickly, and getting it out there so other LS3 owners can reliably add power to their vehicles. Others may try to copy this package, but the results speak for themselves!! Vector and ZZ Motorsports have hit a homerun on this package, and we think the Camaro public will agree! If you have any questions regarding this package, pricing, or installation you can contact Kirk at Vector Motorsports or Mark at ZZ motorsports. Last edited by ZZcamaro; 06-24-2009 at 08:46 AM. |
06-22-2009, 02:36 PM | #2 |
NOICE!!! ™
|
Nice! How much?
__________________
|
06-22-2009, 02:47 PM | #3 |
Drives: 2SS w/ ZZ427 Package!! Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 2,700
|
PM Sent.....Couldn't post the price here, I did not want the post to be moved...Contact us if you need details.
I was told I can post the price since we were asked. The installed and tuned price will be $4950 Last edited by ZZcamaro; 06-22-2009 at 08:09 PM. |
06-22-2009, 05:08 PM | #4 |
Drives: Silver SS/RS, Man 6 Join Date: Apr 2009
Location: DFW area, Texas
Posts: 884
|
Something is not correct in the first post. The dyno run for TEST was done before the BASE run. How can that happen. Also early in the AM unless Vector works at night. Whasup??
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears |
06-22-2009, 06:56 PM | #5 |
Drives: 2010 CGM 2SS 6spd Join Date: Apr 2009
Location: Houston
Posts: 327
|
would also like to know how much for the package!
|
06-22-2009, 07:40 PM | #6 | |
Drives: 2009 Pontiac G8 GT Join Date: Jun 2009
Location: Clinton Twp., MI
Posts: 241
|
Quote:
Last week we had it reporting it was 2015. The dyno on the other hand is accurate within 1HP and calibrated every week. |
|
06-22-2009, 08:09 PM | #7 |
Master of Medicine
Drives: 4th Gen Join Date: Oct 2008
Location: Kentucky
Posts: 784
|
Nice work guys...can't wait to see track times, once the weather is better.
__________________
2002 Camaro SS. 408 LS2. 500+RWHP/480RWTQ. Full UMI RR suspension. Koni/Strano. 295F/315R. 3500#(55/45)
|
06-23-2009, 08:29 AM | #8 |
Drives: Firehawk Join Date: Jun 2009
Location: Port Huron
Posts: 213
|
|
06-23-2009, 01:36 PM | #9 | |
Zot!
Drives: Toyota 4Runner Join Date: Feb 2009
Location: Orange County, California
Posts: 1,317
|
Quote:
Can't you get it supercharged for only 2 grand more? |
|
06-23-2009, 01:56 PM | #10 |
Founder - Michigan FBody
Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008
Location: New Haven, MI
Posts: 2,599
|
Steve's one of the best tuners around - Cheers to Vector Motorsports and ZZ Motorsports for an awesome package offer!
|
06-23-2009, 01:58 PM | #11 |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
Nice work guys.
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
06-23-2009, 01:59 PM | #12 | |
Drives: 1998 Camaro SS Join Date: Oct 2008
Location: Lancaster, CA
Posts: 1,115
|
Quote:
I agree though, I would have expected the total cost of what they did to be less. I'd like to see a break down of what each part costs. Still good work and impressive gains. I think I'll be happy with an intake/cam/exhaust camaro! |
|
06-23-2009, 02:13 PM | #13 |
Rider of the short BUS
Drives: Ukon/F350(work)/Intruder800 Join Date: Dec 2008
Location: London, KY
Posts: 268
|
What would the price be if I install it myself?
__________________
SIM with CGM rallies
|
06-23-2009, 02:48 PM | #14 |
Booooosted.
|
I live in Mobile Alabama. It would be a helluva trip but if you could gaurantee the work and the gains in some way I would certainly be interested. Had a GT 500 want to race but I'm not stupid.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAMARO WIKI | Tran | Wiki | 66 | 04-22-2024 11:41 AM |
Aftermarket Cold air intake | SSCamaro2010 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 40 | 10-01-2010 02:32 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Motorgen LA Invasion Videos (58) and Pics Thread | SeanPlunk | USA - California | 5 | 05-31-2009 01:23 AM |
Detroit News panel wants GM to build Camaro concept | Tran | 5th Gen Camaro SS LS LT General Discussions | 12 | 03-15-2009 04:38 PM |