10-28-2012, 05:55 PM | #1 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
Pedders Sway Question
Have the ZL1 upgraded sways on mine and the wife's cars. Want to stiffen the front. Currently on the middle hole. To make the bar stiffer do I move it to the front hole? The one closest to the steering rack. Kinda dumb question but we have left it where it was since install. We are starting to tweak her car for AutoX. Thx.
|
10-28-2012, 06:15 PM | #2 |
|
I don't have Pedders sways but my Pfadt sways are the farthest hole is the stiffest if that makes sense. The hole closest to the actual bar is the softest.
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
10-28-2012, 06:45 PM | #3 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
Looked at the Pfadt pics of their sways. One has holes in a horizontal direction like my Pedders. The other pics show holes in a vertical direction. Which direction do you holes run?
|
10-28-2012, 06:59 PM | #4 |
|
My front Pfadt bars aren't adjustable but to me it would be the same as the rear. Farthest hole away from the bar would be stiffest. See if you can find out on the Pedders forum.
http://forums.peddersusa.com/forumdisplay.php?f=24
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
10-28-2012, 07:05 PM | #5 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
Thx. I'll post over there. Meanwhile if anyone else knows I'd appreciate it. Thx again.
|
10-29-2012, 02:22 AM | #6 |
Drives: 2011 Victory Red 1SS/RS M6 Join Date: May 2010
Location: PA
Posts: 481
|
Soft, Medium or Hard. Soft, furthest away from the mounting bracket, is the hole closest to the firewall. Medium is the middle hole. Hard, the hole closest to the sway bar mounting bracket, is closest to the radiator.
__________________
|
10-29-2012, 08:10 AM | #7 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
Thanks Fast, got to thinking about this morning and that's the conclusion I came up with also. Closest to the bar gives less leverage to 'twist' so it would be stiffer. Farther from bar more leverage so softer. Thx again.
|
|
|
|
|