10 rib conversion = money well spent

[AGP Turbo]

Originally Posted by 2012LS3VERT

Yes. Our tensioner mounts on a 3/4" thick billet bracket, and the secondary bracket that holds the pulley under the TB is mounted both to our tensioner bracket and the blower.

Wish you guys had more of your stuff on your website. Sounds like you have a lot of good blower solutions.

[hou30guy]

Bought my maggie used so he gave me ur hd tensioner. I went ahead and ordered the ati 10 rib kit since i didnt get a answer in time. But i would like the bracket that relocates tge idler under the intake hose

Sent from my SM-G955U using Tapatalk

[2012LS3VERT]

Originally Posted by AGP Turbo

Wish you guys had more of your stuff on your website. Sounds like you have a lot of good blower solutions.

Yes, im trying to work on it now that im settled in on my deployment. When you are trying to make affordable parts in the USA, we have to do a lot in house, including our website! In addition we make parts for other companies private label as well, we stay busy. When I get back I hope to finish up the last of our Maggie products.

[2012LS3VERT]

Originally Posted by hou30guy

Bought my maggie used so he gave me ur hd tensioner. I went ahead and ordered the ati 10 rib kit since i didnt get a answer in time. But i would like the bracket that relocates tge idler under the intake hose

Sent from my SM-G955U using Tapatalk

Yes, i just found that out a day or two ago, sorry im still trying to get caught up. I know the shop guys are working on the bracket for production now.

Be careful with the waterpump pulley, many people destroy their waterpump trying to get the pulley changed, as it isnt actually made to come apart. Thats the real reason we sell our kits with a complete pump, we dont make money on the pump itself.

[hou30guy]

Originally Posted by 2012LS3VERT

Yes, i just found that out a day or two ago, sorry im still trying to get caught up. I know the shop guys are working on the bracket for production now.

Be careful with the waterpump pulley, many people destroy their waterpump trying to get the pulley changed, as it isnt actually made to come apart. Thats the real reason we sell our kits with a complete pump, we dont make money on the pump itself.

Lol thats my consern now is the water pump, probably torch it off or cut holes in pulley for a puller

Sent from my SM-G955U using Tapatalk

[hou30guy]

Originally Posted by hou30guy

Lol thats my consern now is the water pump, probably torch it off or cut holes in pulley for a puller

Sent from my SM-G955U using Tapatalk

Worst case scenario how much is ur water pump

Sent from my SM-G955U using Tapatalk

[2012LS3VERT]

the pump is on our site. the pulley wont pull off, have to cut it off. then to press on new hub, have to remove rear cover that is pressed and glued in to support the shaft. then reseal the rear cover.

[hou30guy]

The machine shop thats building my motor took care of it yesterday

[hou30guy]

Where can i buy the billet bracket to relocate the idler under the tb, need it asap

Sent from my SM-N950U using Tapatalk

[2012LS3VERT]

Ill see if they can post them up on the site this week, they should be back from anodizing.

[hou30guy]

Originally Posted by 2012LS3VERT

Ill see if they can post them up on the site this week, they should be back from anodizing.

Whats the site address

Sent from my SM-N950U using Tapatalk

[hou30guy]

And will it comes with the idler and bolt

Sent from my SM-N950U using Tapatalk

[2012LS3VERT]

My signature block under my posts keeps disappearing that has our url, www.pegasuscnc.com

I will likely have them put it on the site with the option of including the pulley and bolt.

[hou30guy]

Thxs

Sent from my SM-N950U using Tapatalk