12-12-2013, 07:20 AM | #71 |
|
Just got another slight modification. Emblempros makes these fill in panels to fit right into the Chevy emblem that the Camaro has embossed into the underhood liner for the vehicle. I decided to get myself one. The guy over at emblempros does quality work. If you have never tried anything that he has, buy it, and try it! It's quality stuff! The best part about this modification is you can have it custom made. I got mine in red and white and it is engraved with "Chevrolet Camaro" on top, and "in memory of Kay Reed" on the bottom. I can still remember when I got the car and went to show Gram. she thought it was a spaceship (gram didn't get out often). the last time I seen her I talked to her about how sad I was that I had to put it away for the winter. She really liked the car and supported my decision to get it. As a matter of fact my grandma supported every decision I ever made. I think about her all the time and miss her a lot so to have her name on my car means a lot to me!
Install was pretty straight forward 1. Remove 8 clips holding the liner under the hood 2. Place the liner on your work bench 3. Lay down the provided template (that I almost heaved in the trash) 4. Make little marks through the 4 holes on the template onto the liner 5. Cut little X's where you marked the liner 6. Stick the bolts on the back of the bowtie through the liner 7. Throw on a washer and locking nut to the backside of the liner and tighten 8. Hang the liner and add the 8 clips back in and you are done! |
12-12-2013, 08:43 AM | #72 |
SoCal HT5
Drives: The Punisher Join Date: Oct 2012
Location: Lebanon
Posts: 646
|
Looks great man!!
Keep up the good work |
12-12-2013, 12:30 PM | #73 |
|
|
12-19-2013, 02:52 AM | #74 |
SoCal HT5 COTW 12/16/2013
|
Sick transformation, the car is coming out beautifully all together! And respect for your Grandma bro, very touching story!
|
12-19-2013, 11:29 AM | #75 |
|
Thank you brother! Congrats again on your COTW!
|
12-19-2013, 10:08 PM | #76 |
Drives: 2017 Corvette Grand Sport Join Date: May 2010
Location: Central NJ
Posts: 10,870
|
Looks awesome! great job so far on the modding
__________________
|
12-20-2013, 07:53 AM | #77 |
|
Thanks man! I check your car out all the time! It is very sick!
|
12-20-2013, 09:00 AM | #78 |
|
I love your build. It is such a beauty to see your car's transformation. Keep it up.
__________________
Specs
TSP Stage 2 Boosted Cam 227/235 at 114 LSA Fore Innovation Triple pump staged (Walbro 342 primary and 2x Walbro 450 secondaries) Procharger D1x with a 3.85 pulley ID1050x Injectors Flex Fuel Sensor Monster LT1 Twin Disk Clutch Holley Sniper Efi Intake Manifold NW 103mm Boosted TB 747rwhp at 12psi on E85 |
12-20-2013, 02:08 PM | #79 |
|
Thanks man! I am digging your headlights! Those rims look awesome on your car too!
|
12-23-2013, 03:08 PM | #80 |
Drives: 2010 VR SS Join Date: Sep 2009
Location: Indianapolis, IN
Posts: 722
|
Love the wheels are the same size as stock?
__________________
|
12-24-2013, 09:26 AM | #81 |
|
No they are 20X9 in the front and 20X10 in the rear. Slightly bigger but still fit on the stock p-zeros
|
12-24-2013, 12:41 PM | #82 |
|
Transformation Tuesday!
|
01-06-2014, 11:50 AM | #83 |
|
I got a Hurst Short Throw Shifter for Christmas! Can't wait to put it in! I will post pictures!
|
01-06-2014, 12:47 PM | #84 |
SoCal HT5
Drives: The Punisher Join Date: Oct 2012
Location: Lebanon
Posts: 646
|
I prefer the after one!!
|
|
|
|
|