05-11-2013, 02:53 PM | #1 |
Sales@TuneTimePerformance
Drives: Camaro SS Join Date: Jun 2012
Location: NJ
Posts: 207
|
100+ RWHP ZL1 we just finished up.
Pete dropped off his stock 6 speed ZL1 after attending our Open House show and putting down 465 RWHP and 458 RWTQ on our Mustang dyno all stock.
The plan was to pick up about 100+ more horsepower to the wheels. Mods: 2.85 Blower Pulley 9.1 Lower Solid Isolator Idler Pulley ID850 Injectors Our Ported Snout and LS7 TB and American Racing Headers with a Mild to Wild switch installed on the stock mufflers. The result was 563 RWHP and 556 RWTQ! here is a video of the dyno and then pics of the install... http://www.youtube.com/watch?v=TK_D25-iXwo The car after Pete dropped it off Ready to remove the stock manifolds The stock pulley setup Manifolds out Headers in now time to remove the blower to install the pulley, port the snout and install the isolator Last edited by Joe@TuneTime; 06-08-2013 at 06:37 PM. |
05-11-2013, 05:31 PM | #2 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
Nice. How much boost now?
|
05-11-2013, 05:45 PM | #3 |
|
Hell Yea
__________________
Jannetty Racing JRE Street Package
|
05-11-2013, 07:46 PM | #4 |
Drives: ZL1 Join Date: Apr 2013
Location: Saudi Arabia
Posts: 8
|
|
05-11-2013, 08:03 PM | #5 |
Sales@TuneTimePerformance
Drives: Camaro SS Join Date: Jun 2012
Location: NJ
Posts: 207
|
Car ended up making just over 16 psi of boost
|
05-11-2013, 09:06 PM | #6 |
Drives: 2013 Ash Zl1 Join Date: Sep 2012
Location: North Jersey
Posts: 49
|
2.85 upper pulley? With 16 #s of boost. I am assuming it has a 2.55
|
05-24-2013, 04:16 AM | #7 |
Drives: 2013 ZL1 Camaro 2000 SLP Camaro Join Date: Oct 2012
Location: Ruther Glen, VA
Posts: 357
|
|
05-24-2013, 06:37 AM | #8 |
Sales@TuneTimePerformance
Drives: Camaro SS Join Date: Jun 2012
Location: NJ
Posts: 207
|
As I wrote before the car has a 9.1/2.85 pulley combo, the ported snout and TB add boost as well.
|
05-27-2013, 09:59 PM | #9 |
Drives: 2020 ZL-1 M6 Join Date: May 2013
Location: Northeast Ohio
Posts: 42
|
This combination is very interesting to me as I want to do most of the work myself and 100hp gain is my first target.
Can someone PM details on the parts (Part numbers, where to buy, how much, etc.)? Thanks! |
|
|
|
|