22x10.5 All around??? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DJ A · 04-30-2014, 05:17 PM

Quote:

Originally Posted by Outlaw77

I don't have any pics yet but I went with the gunmetal textured finish and they look awsome!!

So Do you think maybe TSW Mirabeau 22x10 in the front and 22x11 would fit on my car? If so I'm probably gonna end up going with those.

Outlaw77 · 04-30-2014, 07:26 PM

Quote:

Originally Posted by DJ A

So Do you think maybe TSW Mirabeau 22x10 in the front and 22x11 would fit on my car? If so I'm probably gonna end up going with those.

I would confirm the offsets. With the right offsets you should be fine.

DJ A · 05-01-2014, 12:53 PM

Ok well thank you for your input guys! I will probably be going with TSW then.

nexxis · 01-25-2018, 09:50 AM

Quote:

Originally Posted by Bo White

All depends on the offset. My 22x9 Forgestars are flush.

If your 22x9 front are flush, what are the offset @Bo White? I have a ZL1 with the bigger brakes too.

Carlos_MRRWheelsInc · 01-25-2018, 12:13 PM

Just for reference here is what our M228 looks like on both the 5th gen and 6th gen with the specs listed below, just to show you how the wheels sit and how much room you have to play around with.

both cars have the same wheel specs. wheel model MRR M228

22x9.5 5x120 25et 66.9b front

22x10.5 5x120 38et 66.9b Rear

5th gen
Name: IMG_6893_zpseoo030fb.jpg
Views: 95
Size: 249.5 KB

Name: IMG_6893_zpseoo030fb.jpg
Views: 95
Size: 249.5 KB

6th gen

Name: ac0c129edcf6beaf3ba54c05424313bc.jpg
Views: 88
Size: 308.3 KB

05-01-2014, 12:53 PM	#17
DJ A Drives: Cammed 2010 SS Join Date: Jun 2013 Location: Albuquerque Posts: 390	Ok well thank you for your input guys! I will probably be going with TSW then. __________________ 2010 Camaro 2SS/RS LS3 - 450rwhp and 425tq - TSP 231/236 Cam, Dynatech 1 7/8" LT Headers, Dynatech Cat Delete, CAI Intake, BMR 1.4" Drop Springs, Hurst Short Throw Shifter, Magnaflow Street Series Axle-Back w/X-pipe - Tuned by Ivan @ SouthwestSpeed

01-25-2018, 12:13 PM	#19
Carlos_MRRWheelsInc Drives: camaro Join Date: Nov 2011 Location: los angeles ca Posts: 404	Just a quick look Just for reference here is what our M228 looks like on both the 5th gen and 6th gen with the specs listed below, just to show you how the wheels sit and how much room you have to play around with. both cars have the same wheel specs. wheel model MRR M228 22x9.5 5x120 25et 66.9b front 22x10.5 5x120 38et 66.9b Rear 5th gen 6th gen