Understanding Lowering Springs - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

15cammedSS · 05-25-2015, 03:25 PM

Pic 2

Vroom_vroom · 05-25-2015, 05:15 PM

I would send a pm to bmr, they are a sponsor on here. That will get you the correct solution. Keep us updated!

15cammedSS · 05-25-2015, 05:26 PM

I sent them a email on thurs of last week but still no response. I'll try the pm

15cammedSS · 05-25-2015, 09:35 PM

Pm sent to the BMR fellas. I couldn't upload a pic in the pm, can someone point them here for the pix please?

thanks for the help...

Apex Motorsports · 07-05-2015, 12:49 PM

Glad to see that it is getting figured out. Strange situation.

15cammedSS · 07-09-2015, 09:57 PM

Yea BMR guys were doing the best they could....unfortunately my issue is on going :( Only now with another set of Phastek springs. Not sure which ones are worse now :(

Apex Motorsports · 07-15-2015, 11:07 AM

Quote:

Originally Posted by 15cammedSS

Yea BMR guys were doing the best they could....unfortunately my issue is on going :( Only now with another set of Phastek springs. Not sure which ones are worse now :(

That is so weird. I have not seen any other 2015s have a problem.

15cammedSS · 07-15-2015, 11:20 AM

I posted calling out all 2015's to see if anyone else has had this issue. Nobody has a 2015. Lol closest that posted was a 2014

Apex Motorsports · 07-15-2015, 11:53 AM

Quote:

Originally Posted by 15cammedSS

I posted calling out all 2015's to see if anyone else has had this issue. Nobody has a 2015. Lol closest that posted was a 2014

Lol. Funny since they have been out for almost a year now. They are not exactly rare anymore.

15cammedSS · 07-15-2015, 12:24 PM

yea that's what I thought as well

Hilflos · 07-15-2015, 01:19 PM

Speaking as one 2015 owner your experiences may have moved lowering springs down my mod priority list a spot or two.

They weren't near the top to begin with though. Suspension is / was my priority. I've got the 1LE suspension in now. The next significant expenditure is going to be cold weather tires, potentially with some new wheels.

After that, dropping the subframe, getting subframe bushings in along with a ZL1 fuel pump, since the subframe will be out anyhow, and then radius rod and rear upper control arm bushings and some trailing arms, along with, potentially, lowering springs enter the picture.

Bolt-ons, cam, heads, rear end gears and half shafts are even further down the list.

Only had the car three and half months though. So doubt I'll I have the suspension "finished" until Spring sometime, at the earliest.

Am following along with this though, and do hope that this winds up getting resolved for you soon.

15cammedSS · 07-15-2015, 04:43 PM

Awwwww we (2015 owners) need some more trial and error! Lol I am yet to have another 2015 SS chime in with the 1.4" front springs :(

Apex Motorsports · 07-24-2015, 08:47 AM

Looks like the updated BMR springs are about ready to ship.

willhe64 · 07-24-2015, 11:08 AM

Quote:

Originally Posted by Apex Motorsports

and dramatically improve the looks of your car.

This. My 1" drop is the best mod I've done to date. And that includes the tvs2300. I park beside a standard camaro and that car looks ridiculous.

05-25-2015, 03:25 PM	#99
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	Pic 2 Attached Images

05-25-2015, 05:15 PM	#100
Vroom_vroom The gritos pollo!!! Drives: Like a idiot Join Date: Jul 2012 Location: Las Vegas Posts: 1,215 View My Garage	I would send a pm to bmr, they are a sponsor on here. That will get you the correct solution. Keep us updated! __________________ ______ If you don't stop how can they give you a ticket?-The Big Tuna___ '12 1Ls Camaro; Slp loud mouth I\|maganflow x-pipe\|Injen long ram intake\|brembo brake upgrade\| russell s.s. lines\|2LT polished 19's\|billet 5mm spacers\|tinted tail lights&markers\|pdmi\|billet c. can\| '13 Avenger R/T '77 T/A 6.6;, draining my wallet.

05-25-2015, 05:26 PM	#101
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	I sent them a email on thurs of last week but still no response. I'll try the pm

05-25-2015, 09:35 PM	#102
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	Pm sent to the BMR fellas. I couldn't upload a pic in the pm, can someone point them here for the pix please? thanks for the help...

07-05-2015, 12:49 PM	#103
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Glad to see that it is getting figured out. Strange situation.

07-09-2015, 09:57 PM	#104
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	Yea BMR guys were doing the best they could....unfortunately my issue is on going :( Only now with another set of Phastek springs. Not sure which ones are worse now :(

07-15-2015, 11:20 AM	#106
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	I posted calling out all 2015's to see if anyone else has had this issue. Nobody has a 2015. Lol closest that posted was a 2014

07-15-2015, 12:24 PM	#108
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	yea that's what I thought as well

07-15-2015, 01:19 PM	#109
Hilflos Drives: 2015 1SS / RS NPP Join Date: Apr 2015 Location: Dayton Ohio Posts: 353	Speaking as one 2015 owner your experiences may have moved lowering springs down my mod priority list a spot or two. They weren't near the top to begin with though. Suspension is / was my priority. I've got the 1LE suspension in now. The next significant expenditure is going to be cold weather tires, potentially with some new wheels. After that, dropping the subframe, getting subframe bushings in along with a ZL1 fuel pump, since the subframe will be out anyhow, and then radius rod and rear upper control arm bushings and some trailing arms, along with, potentially, lowering springs enter the picture. Bolt-ons, cam, heads, rear end gears and half shafts are even further down the list. Only had the car three and half months though. So doubt I'll I have the suspension "finished" until Spring sometime, at the earliest. Am following along with this though, and do hope that this winds up getting resolved for you soon.

07-15-2015, 04:43 PM	#110
15cammedSS Drives: 2015 2SS....white Join Date: May 2015 Location: Katy, TX Posts: 527	Awwwww we (2015 owners) need some more trial and error! Lol I am yet to have another 2015 SS chime in with the 1.4" front springs :(

07-24-2015, 08:47 AM	#111
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Looks like the updated BMR springs are about ready to ship.