07-05-2012, 08:54 AM | #1 |
Drives: 2012 2SS/RS LS3 Join Date: May 2012
Location: Pearland, TX
Posts: 388
|
Fuel Feed Line
Guys...I have an 2012 LS3 and was looking to flip my fuel rails 180. Does anyone know who sells the small feed line that is needed? I have seen it on TechAFX as part of a kit (2010/11 heater relocate kit) but not as an individual item. Thanks in advance for the help!
|
07-05-2012, 09:28 AM | #2 |
Account Suspended
|
Contact your local Chevy dealer. The fuel line you want is for the C6 Corvette. It is stainless steel braided. The ends are straight. The TechAFX line has 45° ends and is braided material over a rubber hose.
|
07-05-2012, 09:41 AM | #3 |
50 Shades of Prey
Drives: TT/SS Join Date: Oct 2010
Location: Between 10 and 20 PSI
Posts: 777
|
Crazy thing I just looked at techafx's website and they sell the heater hose relocation for 245 and GM sells it for 80.
__________________
Futral Motorsports built and tuned
|
07-05-2012, 10:01 AM | #4 |
Drives: 2012 2SS/RS LS3 Join Date: May 2012
Location: Pearland, TX
Posts: 388
|
Thanks for the help guys. I found what I was looking for. The GM part no. is 10324452 if anyone else is interested.
|
07-05-2012, 10:47 AM | #5 |
Drives: 2012 2SS/RS LS3 Join Date: May 2012
Location: Pearland, TX
Posts: 388
|
Any tips when flipping the fuel rails? Is it as simple as popping out and snapping back in? Thanks
|
07-05-2012, 11:06 AM | #6 |
|
Not quite that simple. You will have to remove your intake because the bolts in the back are too long. You can go on the TECH AFX website and download their very long and detailed instruction guide. If you have a little mechanical ability and some basic tools its not hard at all.
|
07-05-2012, 12:52 PM | #7 |
|
Jdp sells the fuel line and heater hose kit for 150.
|
07-05-2012, 01:03 PM | #8 |
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
is this the part your looking for? if so i'll sell it to you....went to a super charger and it is leftover
|
|
|
|
|