06-28-2011, 07:48 AM | #1 |
Drives: 2010 camaro Join Date: May 2011
Location: Southeast,
Posts: 842
|
2nd Gear Clunk
I have been researching the forums and I cant seem to find this issue Im encountering... I see other threads about the trans/snychros as well as the launch control but not what im experiencing below.
When I shift from 1st to 2nd at the higher RPM range (5k or above) I get a huge clunk into 2nd gear. Like the car is saying no I dont want to go into that gear but if I must I will. You need some force behind it to get into gear. There is no grinding issue, just a clunk. Normal conditions, slow speed and low rpm shifts are all fine. This morning when I had to take the car to work, I pulled out into traffic and got on it till the 5k range.. shift and clunk into 2nd. All other gears are fine... I first I thought it may be due to the hurst shifter since they are naturally hard to get into gear but it doesnt seem like it. Question is has anyone experience this before? Is this normal? I know these trans are loud. I dont think Im doing it but could maybe pulling the gear to much to the left cause the clunk? The clunk seems to be coming from underneath/rear rather than right at the stick. Any help would be great! thanks |
06-28-2011, 07:49 AM | #2 |
Drives: 2010 camaro Join Date: May 2011
Location: Southeast,
Posts: 842
|
Sorry, today wasnt the first time btw. It happens everytime into 2nd at a higher RPM range. I was just giving an example.
|
07-08-2011, 12:01 PM | #3 |
Drives: 2010 Artic White Camaro 2SS Join Date: Apr 2011
Location: Jacksonville, NC
Posts: 2
|
I'm having the same issue even though I don't have the hurst shifter installed and would be interested in what the problem is.
|
07-14-2011, 08:20 PM | #4 |
army life
Drives: 2018 hyper blue zl1 Join Date: Feb 2011
Location: clarksville, tn
Posts: 868
|
im in the same vote here and iinstalled a hurst shifter be nice to know since we all seem to be discovering the same issue
|
07-14-2011, 10:12 PM | #5 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
|
07-14-2011, 10:25 PM | #6 |
first time i shift outta first it always makes a weird noise then everytime after is ok...strangness
|
|
07-18-2011, 01:05 PM | #7 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
supersport11, have you ever had your vehicle checked over to see what might be the cause of this issue? Thank you for your time.
Jeff Morris, Chevrolet Customer Service |
04-06-2012, 09:57 PM | #8 |
Drive Fast Take Chances
|
i got the same issue but 2nd to third it feels like a clunk
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2nd gear grind??!! | 11SynergyGr&Bl | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 12 | 06-24-2011 06:28 PM |
2nd gear and Reverse of Fiero grind/won't go into gears. Any takers? | Arachnyd | General Automotive + Other Cars Discussion | 0 | 03-20-2011 01:05 PM |
VIDEO OF MY 505 RWHP CAMARO 1ST AND 2ND GEAR PULL | SILVER BULLITT | Camaro Photos | Spyshots | Video | Media Gallery | 26 | 08-25-2010 07:34 PM |
trying 2nd gear burnout | 22" RS SS | 5th Gen Camaro SS LS LT General Discussions | 10 | 02-19-2010 10:21 PM |
Does any 6 speed owners see a need for a gear indicator? | OHIOSS | 5th Gen Camaro SS LS LT General Discussions | 98 | 10-13-2009 08:36 PM |