10-13-2009, 09:45 PM | #1 |
Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009
Location: Bowling Green, Ky
Posts: 3,355
|
******** install need HELP!!!!
I ordered the larger sub box to fit my JL 12" and also got the amp rack along with recommended amp and the install kit. I hooked everything up as directed in instructions and I have nothing. I have power to the amp as power light is on but there is nothing at the sub. I am lost and don't know enough about this to even guess. I figured with as easy as the directions were laid out and I went over every step twice to make sure everything was correct but it doesn't work. Any ideas from guys who have done this install? Steve hopefully you will catch this and can lead me in the right direction.
|
10-14-2009, 09:31 AM | #2 |
.
Drives: ... Join Date: Apr 2009
Location: Colorado
Posts: 1,380
|
Is your polarity correct from the amp to your sub????
Is the gain turned down all the way on the PAC???? On the Amp?? Did you connect the correct beige wire when hooking up the PAC as there are two beige wires??? Something to start with!! |
10-14-2009, 09:35 AM | #3 |
Drives: 2010 Camaro 2LT/RS Join Date: Sep 2009
Location: Northern, VA
Posts: 191
|
You should just give Steve a call...He can probably walk you through troubleshooting whatever the problem may be. I haven't set mine up yet so hopefully i don't run into any problems. Good luck!!
__________________
Drives 2010 Camaro CGM 2LT/RS - Black Interior/Sunroof
1100: Preliminary order accepted - 8/7/2009 2000: Accepted by GM - 8/26/2009 3000: Accepted by production control - 9/2/2009 TPW 09/21/2009 3300: Scheduled for production - 9/10/2009 3400: Broadcast - 9/18/2009 3800: Produced - 9/25/2009 A9150194 4000: Available to ship - 9/26/2009 4200: Shipped - 9/28/2009 5000: Delivered to the dealer - 10/12/2009 6000: Delivered to the customer - 10/12/2009 |
10-14-2009, 12:20 PM | #4 |
Account Suspended
Drives: 2011 2SS IOM Vert Join Date: Aug 2009
Location: Indiana
Posts: 1,096
|
Amps ship from the factory with gains at zero and would explain no sound. Also make sure the rca is feeding into the input jacks and not the slave jacks on the amp. And verify the sub is wired and hooked up correctly and that the amp is not in protect mode. I have some more ideas beyond that. PM me if you need further assistance.
|
10-15-2009, 11:00 AM | #5 |
U235 is fun!
Drives: CGM 2SS/M6 Join Date: Apr 2009
Location: Florence, AL
Posts: 403
|
Gains are turned down.. Same thing happened to me.. I was wtf?? lol
|
10-15-2009, 11:41 AM | #6 |
SoCal C5 Family Member
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,299
|
Yup, same to me! Make sure it's set to LP - for Sub only, then slowly turn up the different dials. It's probably cutting out all the low frequencies! I had many and e-mail with Steve who helped me to get it all working!
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers; |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY : Install underdrive pulley on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 34 | 09-30-2013 08:25 PM |
How to Install QTP Electric Cutouts | Quick Time | Camaro DIY & HOW-TO instructions & discussions | 73 | 05-03-2010 12:19 PM |
M45 Blinder X-treme laser jammer install | klove | Camaro DIY & HOW-TO instructions & discussions | 7 | 12-10-2009 03:39 PM |
******** CF Install | Tecca | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 10 | 09-13-2009 09:27 PM |
DIY : Install catback on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 3 | 08-09-2009 04:36 PM |