11-26-2013, 11:33 AM | #1 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
FS: 18" Z06 Vette wheels & MT ET STREET DR's
MT ET STREET DR's 305/35/18 and Z06 Vette wheels 18x9.5 with
40mm offset so no spacer needed. . Bolts straight up, just ziptie E-brake cable up and your good to go. There is a little more than half tread on the tires. These tires brand new just by themselves cost $660. My best 60ft with these was 1.560 with just bolt ons. $700 for both wheels & tires. Local pickup. STILL ABOVE THE WEAR BARS |
11-29-2013, 07:49 AM | #2 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
Bump!
|
11-30-2013, 07:45 PM | #3 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
SOLD!
Thanks JT...
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
12-02-2013, 12:51 PM | #4 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
|
|
|