12-09-2014, 08:31 PM | #1 |
Drives: 2014 ZL1 White Convertible Join Date: Aug 2013
Location: St Pete Fl
Posts: 682
|
Dashlogic
I purchased the dashlogic device a while ago, and although I liked it in general, the software wasn't quite ready for the 2014 model. Rather then return it, I decided I would wait for them to update the software (because I really do like the device). So I am wondering is anyone out there using the dashlogic device on a 2014 or newer?. Is it working without issues?.
|
12-09-2014, 09:12 PM | #2 |
I have a 14 with my link. I really like the dash logic overall. The two issues with it for me are:
- when you want to use the navigation you have to press a few of the nav screen buttons first then input your destination. Otherwise I get a message saying I need to disable turn by turn directions before I can use the nav feature. - When I do the above and the nav is navigating the audio system mutes completely. Turning the volume up on audio screen or steering controls will not work thus not being able to hear the radio, music or turn by turn. As long as I'm not using navigation the audio works fine. I have the latest version of firmware installed as well. I really like what the dash logic provides and hope the company is able to work out further bugs. |
|
12-09-2014, 11:03 PM | #3 | |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
Quote:
That's how I understood it.
__________________
2013 Camaro ZL1 Convertible CRT - 630 RWHP / 620 RWTQ - ADM Performance Built/Tuned - ZL-700 Package - LS9 CAM - Lingenfelter CNC Ported Heads - Stainless Power Headers
|
|
12-10-2014, 05:55 AM | #4 |
Drives: 2014 ZL1 M6 Join Date: Jul 2014
Location: Virginia
Posts: 493
|
So i do not have navigation in mine.
Any issues i could expect with the standard radio? Tony
__________________
2014 ZL1 M6
Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq |
12-10-2014, 06:09 AM | #5 |
|
I don't have Navi either and no audio problems; however I'm running software version v1.15 as I couldn't get Dashlogic to work with any other version on my '13. Palmer made a major software change after v1.15 for the '14s that affected how it works on '10-13s. Is anyone with a '10-'13 using the latest version v1.18 without any problems?
|
12-10-2014, 06:54 AM | #6 | |
709 RWHP & 677 RWTQ
Drives: 13' HPE 800 ZL1..... IOM vert, M6 Join Date: Feb 2013
Location: South Windsor, CT
Posts: 1,140
|
Quote:
__________________
11.34 @ 124.88
|
|
12-10-2014, 07:27 AM | #7 |
Drives: 2014 ZL1 White Convertible Join Date: Aug 2013
Location: St Pete Fl
Posts: 682
|
Schuss, when you say the Nav. screen doesn't work. What exactly is happening with the nav. screen?.
|
12-10-2014, 07:41 AM | #8 |
709 RWHP & 677 RWTQ
Drives: 13' HPE 800 ZL1..... IOM vert, M6 Join Date: Feb 2013
Location: South Windsor, CT
Posts: 1,140
|
The info from the dashlogic doesn't work. The radio and all works, not sure about navigation, haven't used them at the same time. The dash logic just shows a box in the lower right corner of the screen, say's something too, just can't remember what.
__________________
11.34 @ 124.88
|
12-10-2014, 08:00 AM | #9 |
Drives: 2017 ZL1, A10, White, sunroof, nav Join Date: Apr 2009
Location: Garner, NC
Posts: 720
|
Nothing new. See this thread: http://www.camaro5.com/forums/showthread.php?t=370496
Been waiting a long time for bug fixes....trans temp reads 32F half the time...and others already noted. Absolutely NO contact from them after rushing v18a to us.......:( |
12-10-2014, 10:32 AM | #10 | |
Hide! My wife's coming!
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011
Location: Las Colinas, TX
Posts: 1,442
|
Quote:
I have Navi and when the dash logic is connected it is using the onstar to display the data. When using onstar navi, you cannot use the mylink navi. When you attempt to, you get a message to turn off the onstar turn by turn.
__________________
2013 Camaro ZL1 Convertible CRT - 630 RWHP / 620 RWTQ - ADM Performance Built/Tuned - ZL-700 Package - LS9 CAM - Lingenfelter CNC Ported Heads - Stainless Power Headers
|
|
12-10-2014, 11:35 AM | #11 |
Drives: 2017 ZL1, A10, White, sunroof, nav Join Date: Apr 2009
Location: Garner, NC
Posts: 720
|
^maybe on yours and that's great, however not here...maybe because I don't have the nav system????? As I said before, GREAT concept and product....just poor customer service getting these bugs fixed. It's like they tried and then gave up, however I really don't know what's going on as I have had no response from them since they sent me
v18a and I let them know still has bugs. Glad yours is bug free. |
12-10-2014, 12:44 PM | #12 |
Track > 1/4 Mile
|
The nav issue is my only gripe. But I rarely use nav so not that big of a deal.
__________________
|
12-10-2014, 01:28 PM | #13 | |
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,300
|
Quote:
The parameters show up on the MyLink display about once in every 20 starts. I inactivated the MyLink (HUD and DIC only) in the configuration but that caused the dreaded "Unknown Location" error on the DIC. For now I have all three display areas active, but on each profile the MyLink is set to display no parameters. This seems to make the Dashlogic the happiest.
__________________
|
|
12-10-2014, 03:32 PM | #14 | |
|
Quote:
|
|
|
|
|
|