10-24-2012, 07:48 AM | #141 |
|
Updated
Here is my new best 60Ft and 1/8 mile. This run was on MT ET street 305/45-18 and those things are insane! They hook every time.
And yes I did red light, and yes I did break out, but considering the times I was happy overall. I hate bracket racing. :( |
10-24-2012, 10:29 AM | #142 | ||
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Quote:
Kyle |
||
10-24-2012, 01:06 PM | #143 |
|
I have BMR bushings and trailing arms and they make all the difference in the world. The trailing arms will help prevent wheel hop which will cause a world of hurt to your drive train.
|
10-24-2012, 02:44 PM | #144 | |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
Quote:
Guys, I'd like to say it was my awesome skill - or other - but this was the one add between 60's in the high 1.7(s) at the very best - to pulling a 1.65 and not really even hitting it hard. And I am a manual transmission so I am forced to think quite a bit when launching. So from a cost / benefit standpoint it certainly is awesome upgrade here and I plan to do more once my $'s reload .... I'm very impressed. Hopefully I don't go down hill from here ...
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
|
|
10-24-2012, 02:45 PM | #145 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
So it looks as though the same run that put in 27th for stock displacement and internal mods should put me at 8th for stock Pirelli's. 60' = 1.8743 L99 A6
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-29-2012, 08:23 PM | #146 | |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
Can you add me to the slicks list please?
60 ft/time: 1.644 Tire Brand/Type: Hoosier Tire Size: 28x10-17 Suspension Upgrades: stock Drivetrain Upgrades: stock Automatic or Manual transmission: MT Rear Gear Ratio: 3.45 DA of 6,200ft.
__________________
|
|
11-02-2012, 10:52 AM | #147 |
Account Suspended
Drives: 2010 camaro ss Join Date: Nov 2012
Location: Richmond Hill, GA
Posts: 726
|
60 ft/time: 1.501
Tire Brand/Type: MT ET Radial II Drag Radial Tire Size: 295/45/17 Suspension Upgrades: UMI Toe/Trail Arms, Custom LCAs, BMR XTreme Drag Bar full stiff, BMR spindle bushings Drivetrain Upgrades: 4L80, 5C Circle-D Stall, DSS Shaft/Hendrix Axles, 1LE Gear Automatic or Manual transmission: Auto 4L80 Rear Gear Ratio: 3.91 LEFT LANE 1100ft DA Last edited by 429; 11-07-2012 at 11:49 AM. |
11-04-2012, 10:07 AM | #148 |
|
My new best 60ft. time
60 ft/time:1.499 Tire Brand/Type:M&H Drag Radials Tire Size:325/45R17 Suspension Upgrades:Pfadts Trailing Arms, Diff Bushings, and Toe Rods Drivetrain Upgrades:JRE Posi-Mod, LPW rear cover, FTI 9.5 2800 Billet Torque Converter Automatic or Manual transmission:A6, 6l80E Rear Gear Ratio:3.45 Left Lane car #2011
__________________
|
11-06-2012, 10:34 AM | #149 |
Guest
|
Can you add me to the drag radials list please?
60 ft/time: 1.548 Tire Brand/Type: Nitto NT05r Tire Size: 305/45r/18 Suspension Upgrades: Eibauch Pro 1" lowered springs, BMR Trailing Arms, BMR Toe End Rods. Drivetrain Upgrades: stock Automatic or Manual transmission: A6 / Yank 2800 Rear Gear Ratio: 3.27 Last edited by SmokedSS; 11-06-2012 at 03:02 PM. |
11-06-2012, 11:13 AM | #150 | |
Account Suspended
Drives: 2010 camaro ss Join Date: Nov 2012
Location: Richmond Hill, GA
Posts: 726
|
Quote:
Timeslip? |
|
11-06-2012, 11:44 AM | #151 |
Guest
|
I thought I had it ... looking for help downloading the attachment / photo
|
11-06-2012, 11:57 AM | #152 |
|
Click on Go Advanced and then you will click the paper clip to upload your image.
__________________
|
11-06-2012, 03:03 PM | #153 |
Guest
|
timeslip entered post #149.. left lane.. thanks for the help...
Last edited by SmokedSS; 11-08-2012 at 05:34 AM. |
11-06-2012, 03:44 PM | #154 | |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
Quote:
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
|
|
|
|
Thread Tools | |
|
|