abs question...full holly terminator refit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

trans665 · 07-05-2022, 05:51 PM

hey guys i have a racecar 2013 Camaro ss auto converted to m6.....car made 1200 rear horsepower at its hay day at 2k18...since then car has been down....

10 point cage
all factory wires and harness's have been removed...all accessories have dedicated relay and fuse panel

fuel is plumbed form new fuel cell .....what I'm trying to say is the car is basically done....engine is controlled by holly terminator setup with 7 inch screen.... all work/labor has been done by me in my garage on time off past couple of years

i hit a rock.. how do i takeoff and redo the ABS brake lines since i don't have the BCM to control it ???

any help is needed and appreciate

07-05-2022, 05:51 PM	#1
trans665 Drives: 2013 2ss Join Date: May 2011 Location: corpus christi Posts: 488	abs question...full holly terminator refit hey guys i have a racecar 2013 Camaro ss auto converted to m6.....car made 1200 rear horsepower at its hay day at 2k18...since then car has been down.... 10 point cage all factory wires and harness's have been removed...all accessories have dedicated relay and fuse panel fuel is plumbed form new fuel cell .....what I'm trying to say is the car is basically done....engine is controlled by holly terminator setup with 7 inch screen.... all work/labor has been done by me in my garage on time off past couple of years i hit a rock.. how do i takeoff and redo the ABS brake lines since i don't have the BCM to control it ??? any help is needed and appreciate __________________ 2013 auto ss..full bmr suspension..3800 stall...s475 turbocharger on 16 psi with 150 nitrous outlet plate...,BTR stage 3 turbo cam.....100% Methanol injection....LY6 6.0 iorn block ... Last edited by trans665; 07-05-2022 at 06:14 PM.