05-12-2017, 03:13 PM | #1 |
Drives: Black 2015 1ss/rs Join Date: Mar 2016
Location: Philadelphia
Posts: 354
|
SS axle question
Does anyone know what the difference between SS auto and SS manual axles? There are different numbers for each. I know numbers and design are different left and right. What is the difference between a manual right side and an auto right side? I've tried to search here and parts houses list them different but say they work on all except ZL-1
|
05-12-2017, 03:19 PM | #2 |
Drives: Black 2015 1ss/rs Join Date: Mar 2016
Location: Philadelphia
Posts: 354
|
They also list z28 separate, I've seen zl1 axles but I've never seen the z28 axle.
|
05-13-2017, 07:56 AM | #3 |
Drives: Black 2015 1ss/rs Join Date: Mar 2016
Location: Philadelphia
Posts: 354
|
Has anyone asked or know the answer to the question of SS axle differences auto to manual? If they are interchangeable why the different #. Auto left vs manual left etc. standard SS not 1le. Z28 and zl1 list as not interchangeable.
|
05-13-2017, 10:48 AM | #4 |
Served USN - Atomic Chimp
Drives: 13 Camaro LSX434 TT M6, 21 ZLE A10 Join Date: Jul 2012
Location: Fort Collins, CO
Posts: 1,605
|
SS axles are SS axles; no difference between Autos and Manuals. Differences arise when 1LE and ZL1 come into play - don't go there.
__________________
In excess of 1,000WHP LSX434 | AGP 65/65 TT | BTR Equalizer Intake | Trickflow 245cc cathedral | BTR custom cam | Cortex EBC | n2mb WOT | ID-1700x | Brisk GR12S | RPM Lv 7 TR6060 | AGP's Triple 525LPH Fore Fuel | Monster LT1-S Triple | 4.11 DSS Proform 9", CF driveshaft, 1400hp axles | Hurst Line Lock | MGW Retro Short Throw w/old skool Hurst T-handle | ADM solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Moreno camber/caster plates |
05-13-2017, 11:00 AM | #5 |
Drives: Black 2015 1ss/rs Join Date: Mar 2016
Location: Philadelphia
Posts: 354
|
Just curious because the part numbers are different on a manual and automatic even though it's the same side. I know left and right are designed different from each other but a left manual and a left auto look the same but have different #'s. Wonder why??
|
05-13-2017, 11:27 AM | #6 |
Served USN - Atomic Chimp
Drives: 13 Camaro LSX434 TT M6, 21 ZLE A10 Join Date: Jul 2012
Location: Fort Collins, CO
Posts: 1,605
|
Probably different revisions of the same part. I've seen others, like the ZL1 axles, have that. If you are looking to pick one, pick the newest as I'd presume it would have some improvements over the earlier version - that's an assumption. Many times it will say "has been replaced by" or "replaces" next to the part numbers as an indicator.
__________________
In excess of 1,000WHP LSX434 | AGP 65/65 TT | BTR Equalizer Intake | Trickflow 245cc cathedral | BTR custom cam | Cortex EBC | n2mb WOT | ID-1700x | Brisk GR12S | RPM Lv 7 TR6060 | AGP's Triple 525LPH Fore Fuel | Monster LT1-S Triple | 4.11 DSS Proform 9", CF driveshaft, 1400hp axles | Hurst Line Lock | MGW Retro Short Throw w/old skool Hurst T-handle | ADM solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Moreno camber/caster plates |
06-05-2017, 08:59 AM | #7 |
Drives: Black 2015 1ss/rs Join Date: Mar 2016
Location: Philadelphia
Posts: 354
|
I'm still looking for info on the difference between SS manual axles and automatic axles. GM parts direct lists all the axles for gen 5 Camaros and obviously left and right are different but for SS mm6(1le) m10(non -1le manual) and myc automatic all the numbers are different. They also list z28 and zl1 axles. Just my curiosity because I've been told a lot that all SS axles can be interchanged as long as the left and right are on the correct side.
|
06-05-2017, 08:08 PM | #8 |
Drives: 2010 Camaro SS Join Date: Oct 2013
Location: Saskatoon SK Can. Eh
Posts: 365
|
All SS axles can be interchanged as long as the left and right are on the correct side.
__________________
2010 Camaro SS RS, Maggie with 3.4" pulley, 60# injectors, ADM dual fuel pumps, ADM Stage 2 Cam with Brian Tooley springs and pushrods, black CAI intake, Stainless Works long tube headers w/gutted cats, ZL1 Diff w/offset bushings, Pfadt lowering springs, Pfadt sway bars, Pfadt solid sub frame mounts, BMR trailing arms and toe rods, Hurst short throw shifter, Painted on Hugger Orange stripes, Forgestar F14 Piano Black wheels, Nitto NT05 rubber.
|
06-05-2017, 08:32 PM | #9 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
I know of some M6 guys running axles out of an auto when they broke their originals and got some off ebay to replace.
Im running a diff out of an auto.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
06-06-2017, 07:34 AM | #10 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
SS and 1LE WILL interchange with NO mod's...read my sig....and why are you gettin all wrapped up in p/n's??? Who care's...1LE is a great intermediate upgrade choice before springing on a more $$$$ setup...only diff is the axle nut size on 1LE is MASSIVE compared to SS nut..
BTW...right and left are different due to length...dat's it...1LE outer CV is bigger(stronger) than SS which is what typically explodes when runnin the Q wit DR's...good luck..
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
06-21-2017, 07:31 AM | #11 |
Drives: 2010 IBM SS/RS/Stick Join Date: Jul 2010
Location: The Holler
Posts: 231
|
Looks like you're going to have to order them both and personally inspect them..
__________________
|
06-21-2017, 02:26 PM | #12 |
Drives: Black 2015 1ss/rs Join Date: Mar 2016
Location: Philadelphia
Posts: 354
|
Thanks again to those who responded.
|
07-10-2017, 02:21 PM | #13 | |
Donkey Dick Cam Camaro
Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009
Location: Los Angeles, CA
Posts: 1,998
|
Quote:
Did you use the stock Non-1LE SSaxle nuts on your 1LE axles? I was told that 1LE axles will slip right in on a stock LS3 SS but that id need to use the axle nuts for the 1LE as the thread on the axle was slightly larger. I just ordered brand new 1LE axles, nuts, and washers that im going to slap on wednesday or thursday part numbers for 1LE axles and nuts driver side axle: 22806795 passenger side axle: 22806796 axle nuts: 11611234 axle washer: 11611965
__________________
Bone Stock |
|
07-21-2017, 07:43 PM | #14 |
Donkey Dick Cam Camaro
Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009
Location: Los Angeles, CA
Posts: 1,998
|
Got the 1LE axles installed today along with BMR trailing arms, out trailing arm bushings, and toe rods. You will need axle nuts if you have a non 1LE car and installing the 1LE axles on it. The non 1LE axle nuts wont work on the 1LE axles
Everything went in smoothly
__________________
Bone Stock |
|
|
|
|