Any suggestions on which wheels/tires I should buy - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

wrtowman · 07-01-2016, 08:27 PM

camaro ss black rohana rc22

Copy that, paste it in Google, hit images, and fap away.

20x10 up front, 20x11 in the rear.

SteelCamaro · 07-01-2016, 08:36 PM

Quote:

Originally Posted by failshift

Other than screaming wannabe. They're cheaply made cast wheels. Prone to failure. Breaking. Ect They're heavy.

•••••••••••••••••••••••••••••••••••••••••••••
LSX376 SLP TVS2300 '13 1LE
Full front half protected by Xpel PPF
Instagram:@Failshift
625hp/582tq
1LE Owners Group:
https://www.facebook.com/groups/559684050767758/

There are a lot of decent replicas out there. Unless he's tracking the car, it doesn't really matter. Very unlikely to fail during normal everyday usage. In the tuner world, Rotas are considered "knock offs," but still used by many and get the job done. Comparable lightweight, forged, multi-piece counterparts can cost sometimes in the couple thousand per wheel. No need to spend that much if looks are the only end game.

failshift · 07-01-2016, 08:39 PM

Quote:

Originally Posted by SteelCamaro

There are a lot of decent replicas out there. Unless he's tracking the car, it doesn't really matter. Very unlikely to fail during normal everyday usage. In the tuner world, Rotas are considered "knock offs," but still used by many and get the job done. Comparable lightweight, forged, multi-piece counterparts can cost sometimes in the couple thousand per wheel. No need to spend that much if looks are the only end game.

Most of the ones breaking aren't even on the track. It's potholes. Or torquing the hat out of the middle

•••••••••••••••••••••••••••••••••••••••••••••
LSX376 SLP TVS2300 '13 1LE
Full front half protected by Xpel PPF
Instagram:@Failshift
625hp/582tq
1LE Owners Group:
https://www.facebook.com/groups/559684050767758/

davidscamaro · 07-01-2016, 08:45 PM

I know a guy with a set of niche rims on a Lincoln mkz and the inside flanges had bends after of only one summer of driving, he said the car still road fine with minimal vibrations. But still not very strong aluminum

Mr. Stacy · 07-01-2016, 09:57 PM

My new favorites. Welker2 has some nice wheels too...

streetyme · 07-01-2016, 09:58 PM

I went with the BBS CH-R's , but there is plenty of wheels that go good with the Camaros body lines

Cowboy Troy · 07-02-2016, 02:17 PM

Quote:

Originally Posted by Dhaliwal559

I have a 15 Camaro. And I'm stuck on which wheels I want to get. I want ZL1's but I feel as too many people have them. And what brand tires are good? And what sizes are good for wheels and tires?
I like 20x10 and 20x11

Or should I just run a square set up and go 20x10 all around?

Also. Any thought in the new 2017 1LE replicas?
http://www.phastekperformance.com/20...1le-wheels.htm

I don't know how I feel about those

Mine came with 21x12 all 4 corners from factory

Dhaliwal559 · 07-02-2016, 03:07 PM

Any thoughts on these

Homeless Man · 07-02-2016, 03:18 PM

Quote:

Originally Posted by failshift

Do. Not. Do. Replica. Wheels.

This is the only guy on the forum that will tell you not to buy replicas. Hundreds of people run them and I have not heard of a single problem...just go though all the threads. And also for some reason he want to let everyone know he has Xpel on the front of his Camaro twice in each post

wrtowman · 07-02-2016, 03:20 PM

Quote:

Originally Posted by Dhaliwal559

Any thoughts on these

That was my second choice in matte black.

Dhaliwal559 · 07-02-2016, 03:23 PM

I decided on replicas... But help now.. Z28 replica? Zl1 replica? Or the 2017 1LE replica

failshift · 07-02-2016, 03:24 PM

Quote:

Originally Posted by Homeless Man

This is the only guy on the forum that will tell you not to buy replicas. Hundreds of people run them and I have not heard of a single problem...just go though all the threads. And also for some reason he want to let everyone know he has Xpel on the front of his Camaro twice in each post

Twice in each post?

•••••••••••••••••••••••••••••••••••••••••••••
LSX376 SLP TVS2300 '13 1LE
Full front half protected by Xpel PPF
Instagram:@Failshift
625hp/582tq
1LE Owners Group:
https://www.facebook.com/groups/559684050767758/

Homeless Man · 07-02-2016, 03:30 PM

Yea

failshift · 07-02-2016, 03:31 PM

Quote:

Originally Posted by Homeless Man

Yea

Strange

•••••••••••••••••••••••••••••••••••••••••••••
LSX376 SLP TVS2300 '13 1LE
Full front half protected by Xpel PPF
Instagram:@Failshift
625hp/582tq
1LE Owners Group:
https://www.facebook.com/groups/559684050767758/

07-01-2016, 08:27 PM	#15
wrtowman Drives: 2011 Camaro 1SS Join Date: Feb 2016 Location: Warner Robins Ga Posts: 778	camaro ss black rohana rc22 Copy that, paste it in Google, hit images, and fap away. 20x10 up front, 20x11 in the rear. __________________ 2011 SGM Camaro 1SS/RS A6 - Vengeance Racing built/tuned. 590RWHP/560RWTQ, ADM LSA Conversion, 2.5 Grip-Tec, ZL1 fuel pump, ADM FPCM, FIC1000, VRPD2 Cam and LS3 Conversion with all the internal goodies, American Racing 1 7/8 Headers, no cats, SW Retro Cat Back, ADM Intake, AFCO HX, Varimax Pump, Rotofab Reservoir, B&M Transmission Cooler, VMAX TB, Elite Engineering CC, BMR LCAs, Trailing Arms, Toe Rods, DSS 1000hp axles, ZL1 Bumper and Sideskirts, Night Owl Halos, Matte Black 20" Rohana RC-22 with 20x10-275s/20x11-315s, R1 Concept Premier Drilled/Slotted Rotors, Hawk Ceramic Pads.

07-01-2016, 09:57 PM	#19
Mr. Stacy El Duderino Drives: 2011 2LTRS Convertible Join Date: Jan 2016 Location: Seattle Posts: 2,194 View My Garage	My new favorites. Welker2 has some nice wheels too... __________________ I bowl. Drive around. The occasional acid flashback.

07-01-2016, 09:58 PM	#20
streetyme Drives: 2016 2SS nav mag ride npp a8 Join Date: Jul 2013 Location: St Louis Posts: 202	I went with the BBS CH-R's , but there is plenty of wheels that go good with the Camaros body lines __________________ 2016 2SS A8 mag ride npp exhaust nav sunroof Rotofab CAI Borla Atak NPP Corsa X pipe BBS CHR Extreme Contactsport 2.9 Whipple Elite catch can Rotofab Juiced Motorsports installed by STG Motorsports JMS Fuel Maxx tuned by Gregs Tuning Operation Weld Laguna 17x10 18x5 2006 mustang gt Magnuson Livernois stage 2 heads stage 2 blower cams dynatech headers 4.10's Circle D convertor 533/511bs) (9.8lbs)

07-02-2016, 03:07 PM	#22
Dhaliwal559 Drives: 2015 Chevy Camaro 1LT/RS Join Date: Aug 2015 Location: Fresno, CA Posts: 561 View My Garage	Any thoughts on these Attached Images __________________ Have a good day!

07-02-2016, 03:23 PM	#25
Dhaliwal559 Drives: 2015 Chevy Camaro 1LT/RS Join Date: Aug 2015 Location: Fresno, CA Posts: 561 View My Garage	I decided on replicas... But help now.. Z28 replica? Zl1 replica? Or the 2017 1LE replica __________________ Have a good day!

07-01-2016, 08:45 PM	#18
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 857	I know a guy with a set of niche rims on a Lincoln mkz and the inside flanges had bends after of only one summer of driving, he said the car still road fine with minimal vibrations. But still not very strong aluminum

07-02-2016, 03:30 PM	#27
Homeless Man Homeless Life Chose Me Drives: LS3 (sold 4/21) Join Date: Nov 2014 Location: Streets of Philly Posts: 3,650	Yea Attached Images __________________ Pity a man in familiar places, who yet feels like a stranger.