10-26-2012, 08:30 AM | #1 |
Drives: 2013 Black ZL1 Join Date: Oct 2012
Location: Oakton, VA
Posts: 7
|
AAC's ZL1 Plasma LED Fog and DRL Bulbs
I just purchased the AAC's Plasma LED Fog & DRL bulbs for my ZL1 & I found out that some people had issue with their bulbs . It may have been regular LED bulb instead of Plasma type.
Anyway, I just want to confirm before the installation. Is there instruction how to install these bulbs? It's not same as regular Camaro due to Front Lip Spoiler. |
10-26-2012, 10:35 AM | #2 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,935
|
I've heard the install is the same, by removing the Torx screws on the outer edge of the wheel well liner and pulling it back you should have access. This also requires removing the tire.
|
10-26-2012, 12:22 PM | #3 |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
You do not have to remove the tire. Just turn the tire to the farthest it will go, depending on how big you are this should give you enough room to get your hands inside the liner.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
10-26-2012, 02:58 PM | #4 |
Mid-Florida Camaro Club
Drives: 2019 ZL1 on Order Join Date: Jan 2011
Location: Heathrow, FL
Posts: 3,136
|
also note that the P13W leds will not fit securly as the fitting changed, so you will need to do a little modifcation to ensure they stay in correctly
I'm waiting for the correct fitting LEDs that will snap in securely before ordering
__________________
|
10-26-2012, 03:02 PM | #5 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
I have P13W's and mine fit perfectly. I have an early build though and I believe there was a change in fittings on later builds.
|
10-26-2012, 03:03 PM | #6 |
Drives: Camaro ZL1 Join Date: Aug 2012
Location: CA
Posts: 1,131
|
Mine fit in perfect, no modification or anything just plug and play. Fits the exact same way as the stock ones, perfect fit and rid of that piss yellow look..
__________________
-2013 Camaro ZL1-Black Stripe Package-Ambient Light Kit-Subwoofer Package-Sunroof-Suede Package-NAV MYLINK-MANUAL BABY-Dual Vented Fenders-Exposed Carbon Fiber Insert
-Black 10 Spoke Wheels 604 RWHP 602 LBS/TQ |
10-26-2012, 04:38 PM | #7 | |
Mid-Florida Camaro Club
Drives: 2019 ZL1 on Order Join Date: Jan 2011
Location: Heathrow, FL
Posts: 3,136
|
Quote:
Late 2012's and 2013 have a different fitting than P13W - similar, but you have to break a tab before it will fit - maybe AAC did this for you first so you didn't notice, but regardless it wouldn't snap until place still
__________________
|
|
10-26-2012, 04:55 PM | #8 | |
Drives: 2012 2LT/RS, 2005 SLK55 AMG Join Date: Jul 2012
Location: Falls Church, VA
Posts: 1,163
|
Quote:
Not sure about the 2013s... |
|
10-26-2012, 06:45 PM | #9 | |
Drives: Camaro ZL1 Join Date: Aug 2012
Location: CA
Posts: 1,131
|
Quote:
__________________
-2013 Camaro ZL1-Black Stripe Package-Ambient Light Kit-Subwoofer Package-Sunroof-Suede Package-NAV MYLINK-MANUAL BABY-Dual Vented Fenders-Exposed Carbon Fiber Insert
-Black 10 Spoke Wheels 604 RWHP 602 LBS/TQ |
|
10-26-2012, 07:10 PM | #10 |
Mid-Florida Camaro Club
Drives: 2019 ZL1 on Order Join Date: Jan 2011
Location: Heathrow, FL
Posts: 3,136
|
Hmm...Well now I'm confused...I read all the threads about them not fitting the 2013s properly....only one way to find out though!
__________________
|
10-26-2012, 07:31 PM | #11 |
2018 Garnet Red ZL1 conve
Drives: 2013 & 2018 ZL1 vert Join Date: May 2009
Location: Des Moines, IA
Posts: 1,471
|
I installed mine with no problems at all on my 2013 ZL1 convertible. All I did was remove the screws on the bottom outside lower valance, pull it down a little for my arm to fit up and remove the old ones and swapped them out with no problem. They look really nice! I will do the same procedure on the front sidemarker lights when I finally receive them from AAC (LED, ghosted, painted). I will take before and after pics.
|
09-09-2013, 08:49 AM | #12 |
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
Anyone have any pictures?
|
09-09-2013, 09:25 AM | #13 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
Mine didn't snap in either I had to southern engineer mine also.
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
09-09-2013, 10:16 AM | #14 |
I Carry!
Drives: 2013 CRT ZL1 Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
|
I had to modify the tab on mine too....have had no issues with them coming out, in fact I hit a bobcat and it broke the bulb loose from the housing (still worked, little quick steel, good as new), but never came out of the connector!!!
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/ |
|
|
|
|