09-26-2012, 02:26 PM | #1 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
BC Racing ER coilover height setup question
Wondering what measurements people used to get X" drop. I only want about 1/2" drop to maintain clearance. Hoping I can get close the first time so I don't have to assemble/disassemble the things 10 times.
Also any other install tips? I've heard their directions suck. Starting the job on Friday. I'll start researching bound/rebound settings as well or I may just start with 16 for bound and rebound and adjust from there. Car setup: Stock wheel/tires are on the car until they die. Pfadt sways, trailing arms, toe rods. Pedders radius rod full bush and cradle/diff bushes. Car will be used in road racing and autocross. Comfortable settings are for sissies. Corner balance and alignment is scheduled in 1.5 weeks. |
09-26-2012, 06:33 PM | #2 |
Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,608
|
PM Mike at Whiteside Customs. He has problably installed more of the BC Racing than just about anyone.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller. |
09-26-2012, 06:52 PM | #3 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
I'll just call BC tomorrow if I have to. But I was hoping some people could share their experiences. I searched for an hour on here and everyone thats bought these or the pedders supercars seem to have paid a shop to do the install. So sad.
|
09-26-2012, 10:04 PM | #4 |
Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,608
|
I don't have the tools or time to tackle a task such as that. And at my age I really don't feel like it.
Good luck with your install.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller. |
09-27-2012, 07:08 AM | #5 |
I understand that Megan is made by BC. This post helped me.
http://www.camaro5.com/forums/showthread.php?t=221950 I set the front at 20mm and the back at 27mm |
|
09-27-2012, 08:38 AM | #6 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
Good thread, I'll have to see if the ER and BR bodies differ a lot when I get them but I'll give it a shot.
|
09-27-2012, 08:42 AM | #7 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
I'm old and broken too but this is my therapy, took time off from work to tackle it. And I'm always looking for an excuse to buy new tools.
|
|
|
|
|