03-13-2013, 11:37 AM | #1 |
Drives: 2011 Camaro 2SS Join Date: Dec 2012
Location: Denham Springs, LA
Posts: 77
|
Installed my ******** box, WOW (added pics)......
Went with the big ******** box that fits on driver's side that is the one that requires cutting the carpet, and I cannot believe how hard it hits. And here is an interesting side note, you don't have to cut your carpet. I will take pics later and show you, if you just remove that panel of carpet then you don't even notice it's missing. And one day if you decide to sell the car, you can put it back in.
This is what I installed: ******** large driver's side enclosure cut for 12" Punch P3D212 2-ohm DVC 12" Sub Rockford Fosgate 5002 Power Acoustic 1.5F Capacitor ******** amp harness ******** groundloop isolator This setup absolutely SLAMS. It easily out-hits my two 10"s I had in my trunk in my Charger, and if you drop the back seat it's insane. Thanks Steve for everything!
__________________
2011 2SS/RS A6 - Black/Black, Stainless Power 1 7/8" Headers and High Flow Cats, CAI Inc. CAI, Borla S-Type Catback, Engine Power Systems Tune, 373 HP / 390 Torque
Last edited by GITUSOM; 03-15-2013 at 10:34 AM. |
03-13-2013, 12:02 PM | #2 |
Drives: Silver 1LT 2011 camaro Join Date: Jul 2011
Location: Decatur, Alabama and Troy, Alabama
Posts: 1,846
|
Any trunk rattle? I have 2 12' kickers and just thinking about doing one stealth box
__________________
|
03-13-2013, 12:17 PM | #3 | |
Drives: 2011 Camaro 2SS Join Date: Dec 2012
Location: Denham Springs, LA
Posts: 77
|
Quote:
Also, my entire trunk is free and open, so much nicer than having a big box back there. I think you would be happy with the sound, I don't see how anyone couldn't be.
__________________
2011 2SS/RS A6 - Black/Black, Stainless Power 1 7/8" Headers and High Flow Cats, CAI Inc. CAI, Borla S-Type Catback, Engine Power Systems Tune, 373 HP / 390 Torque
|
|
03-13-2013, 12:19 PM | #4 | |
Drives: Silver 1LT 2011 camaro Join Date: Jul 2011
Location: Decatur, Alabama and Troy, Alabama
Posts: 1,846
|
Quote:
__________________
|
|
03-13-2013, 12:35 PM | #5 | |
Drives: 2011 Camaro 2SS Join Date: Dec 2012
Location: Denham Springs, LA
Posts: 77
|
Quote:
******** large driver's side enclosure cut for 12" - $129 Punch P3D212 2-ohm DVC 12" Sub - $125 Rockford Fosgate 5002 - $200 Power Acoustic 1.5F Capacitor - $30 ******** amp harness - $69 ******** groundloop isolator - $6
__________________
2011 2SS/RS A6 - Black/Black, Stainless Power 1 7/8" Headers and High Flow Cats, CAI Inc. CAI, Borla S-Type Catback, Engine Power Systems Tune, 373 HP / 390 Torque
|
|
03-13-2013, 12:38 PM | #6 |
Drives: Silver 1LT 2011 camaro Join Date: Jul 2011
Location: Decatur, Alabama and Troy, Alabama
Posts: 1,846
|
Okay thanks! Looks like ill have to wire it differently since i dont have the BA system
__________________
|
03-13-2013, 05:30 PM | #7 | |
Drives: 10' White w/black stripes Camaro RS Join Date: Oct 2012
Location: New Jersey
Posts: 194
|
Quote:
I'm in the middle of my install of my sub from ********. What are these Rockford Fosgate 5002 Power Acoustic 1.5F Capacitor ******** groundloop isolator??? what do they do? will I be fine with just the harness?
__________________
2013 Zl1 M6. JL W3 Picasso amp. Kooks LTs and Rotofab Intake.
|
|
03-13-2013, 07:57 PM | #8 |
HTCC Member
|
Pictures of how you setup your box, without the need to cut the carpet ?
|
03-14-2013, 10:41 PM | #9 |
Drives: 2010 ABM 2SS/RS M6 Join Date: Jun 2009
Location: West Chester, Ohio
Posts: 86
|
He just removed the side panel carpet, instead of cutting it. I did the same thing with mine. You barely notice it, and only when you are looking for it and looking at a particular angle in the trunk.
|
03-14-2013, 10:51 PM | #10 |
|
let's see some pics..
|
03-15-2013, 10:30 AM | #11 |
Drives: 2011 Camaro 2SS Join Date: Dec 2012
Location: Denham Springs, LA
Posts: 77
|
This is everything installed. As you can see, you can't really notice the carpet is missing behind the box due to how big it is. If you stick your head in the trunk, you could tell if you looked between the end of the box and the amp, but who does that? I think it's a small price to pay to preserve my carpet.
This is the panel of carpet you remove:
__________________
2011 2SS/RS A6 - Black/Black, Stainless Power 1 7/8" Headers and High Flow Cats, CAI Inc. CAI, Borla S-Type Catback, Engine Power Systems Tune, 373 HP / 390 Torque
|
03-15-2013, 10:32 AM | #12 |
Drives: 2011 Camaro 2SS Join Date: Dec 2012
Location: Denham Springs, LA
Posts: 77
|
The 5002 is my amp, the capacitor is an optional piece of equipment that keeps a more steady supply of power to your amp and cuts down on lights dimming, and the groundloop isolator just cleans up any "pop" noise some feedback in the wiring can cause. The amp obviously is not optional, but the capacitor and isolator are.
__________________
2011 2SS/RS A6 - Black/Black, Stainless Power 1 7/8" Headers and High Flow Cats, CAI Inc. CAI, Borla S-Type Catback, Engine Power Systems Tune, 373 HP / 390 Torque
|
|
|
|
|