11-06-2015, 11:29 AM | #1 |
Drives: 2013 Camaro 1LS - Ashen Gray Join Date: Jan 2015
Location: Florida
Posts: 588
|
Whats wong with this picture 2
Yes there is more - lets see if you can guess whats wrong in this picture and why... it was happening to me!!
__________________
"WIDOW" Overkill Edition w/Mace Cams,80mm tb,Jacfab spacer/ported intake,Alky Control,ARH off road pipes,SOLO custom system,3.91 gears, MGW,Phantom grilles,ZL1 appearance pkge, 3dCarbon vents, Lingenfelter hood and spoiler, PLX boost/wideband modules/gauge,ZL1 fuel pump,LF3 hpfp,DSS aluminum driveshaft,JPSS sway bars, Z28 replica wheels and CxRacing coilovers..
|
11-06-2015, 01:35 PM | #2 |
Drives: 2013 Camaro 1LS - Ashen Gray Join Date: Jan 2015
Location: Florida
Posts: 588
|
hint- it has to do with the bottle
__________________
"WIDOW" Overkill Edition w/Mace Cams,80mm tb,Jacfab spacer/ported intake,Alky Control,ARH off road pipes,SOLO custom system,3.91 gears, MGW,Phantom grilles,ZL1 appearance pkge, 3dCarbon vents, Lingenfelter hood and spoiler, PLX boost/wideband modules/gauge,ZL1 fuel pump,LF3 hpfp,DSS aluminum driveshaft,JPSS sway bars, Z28 replica wheels and CxRacing coilovers..
|
11-06-2015, 02:24 PM | #3 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
I'd imagine it would be pretty tricky to top off that bottle.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
11-06-2015, 04:29 PM | #4 |
Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012
Location: Edmond, Oklahoma
Posts: 3,073
|
This is a fun game! (for us not you)
Honestly I couldn't figure it out until you said bottle and now it seems so obvious. That's the same washer bottle that came with my turbo kit. I ran it for awhile then just removed it and left it off. I don't think I've ever used my windshield washer fluid in the last 3 years except maybe just to see that they worked lol. Looks cleaner in the engine bay without it.
__________________
3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph |
11-06-2015, 04:59 PM | #5 |
Drives: 2013 Camaro 1LS - Ashen Gray Join Date: Jan 2015
Location: Florida
Posts: 588
|
Although filling was a challenge, not it.... hint getting warmer the pressure is building!
__________________
"WIDOW" Overkill Edition w/Mace Cams,80mm tb,Jacfab spacer/ported intake,Alky Control,ARH off road pipes,SOLO custom system,3.91 gears, MGW,Phantom grilles,ZL1 appearance pkge, 3dCarbon vents, Lingenfelter hood and spoiler, PLX boost/wideband modules/gauge,ZL1 fuel pump,LF3 hpfp,DSS aluminum driveshaft,JPSS sway bars, Z28 replica wheels and CxRacing coilovers..
|
11-06-2015, 05:48 PM | #6 |
Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012
Location: Edmond, Oklahoma
Posts: 3,073
|
Hmm.... This one's harder than the first one. I was going to say the coolant hose routing since it says engine on the hose by the radiator cap but I looked and mine is the same way. I guess I just don't see it. Its probably very obvious.
__________________
3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph |
11-06-2015, 09:14 PM | #7 |
Drives: 2013 Camaro 1LS - Ashen Gray Join Date: Jan 2015
Location: Florida
Posts: 588
|
Ok... so that is the Methanol tank .. apparently not a good location for that fluid as as it heats up it builds pressure and can n will cause activation or more
__________________
"WIDOW" Overkill Edition w/Mace Cams,80mm tb,Jacfab spacer/ported intake,Alky Control,ARH off road pipes,SOLO custom system,3.91 gears, MGW,Phantom grilles,ZL1 appearance pkge, 3dCarbon vents, Lingenfelter hood and spoiler, PLX boost/wideband modules/gauge,ZL1 fuel pump,LF3 hpfp,DSS aluminum driveshaft,JPSS sway bars, Z28 replica wheels and CxRacing coilovers..
|
11-07-2015, 08:19 AM | #8 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,564
|
It appears there's a screw or bolt in the center of the bottle bracket which seems to imply it's screwed into the reservoir?
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
11-07-2015, 09:03 AM | #9 |
thats gotta be it lol. windshield washer fluid res prob not very strong
__________________
All of it.
|
|
|
|
|
|