07-29-2011, 05:46 AM | #1 |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
my (homemade) solid (not tint) side marker blackouts (w/pics)
well,
i had a strip of gloss black vinyl laying around, and was sick of the precut pieces you can buy for the side markers, as they never seemed to fit the side markers perfectly, and dirt always gets underneath them. so i had an idea to use the gloss black vinyl (not tint) to do the side markers. i popped out the side markers to make it easier to work with, instead of trying to do it on the car. obviously no light would get through the solid color vinyl, so after i put the vinyl on the markers i cut small rectangles out right where the light shines through, it looks similar to the concept side markers but the slit does not go all the way across the side marker, just a small rectangle in the center. not sure how legal they are at the moment, but if i get pulled over i can peel them off i think they look great,whatcha think? ill post better pics once the sun comes up all they way LOL
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
07-29-2011, 05:51 AM | #2 |
"To Punish And Enslave"
Drives: B E RS GBA #72541 3564 CC 220 CI Join Date: May 2011
Location: massachusetts
Posts: 3,889
|
nice idea would look better with the long slit like the conspet but each there own i like it
__________________
C.A.M.A.R.O- Constantly Adding Modifications Addiction Relentless Obsession 90% canadian 10% mexican 100% american muscle :flag2: |
07-29-2011, 05:53 AM | #3 |
Drives: RS (11/15/10) Join Date: Mar 2010
Location: Baton Rouge,LA
Posts: 574
|
That looks good .
Another idea would be to cut off the top . To blend in with body lines. Like show stoppers . + another idea . Color matched vinyl . It helps because I felt the yellow or the blackouts were throwing off my hockey stripes . Edit : lol he said it first ^^
__________________
TEAM LLT
Nov.15th 2010 -- Check out my build thread http://www.camaro5.com/forums/showthread.php?t=116235 |
07-29-2011, 05:54 AM | #4 | |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
Quote:
i just didnt like the long slits for some reason, i did them with the long slits first and decided to redo them and try the smaller ones. until im good enough to cut skulls outta them these will have to work
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
|
07-29-2011, 05:57 AM | #5 | |
"To Punish And Enslave"
Drives: B E RS GBA #72541 3564 CC 220 CI Join Date: May 2011
Location: massachusetts
Posts: 3,889
|
Quote:
i see carbon fiber vyinal at a local autoparts store for like 12 bucks do black outs but with carbon fiber look what you think on a black car ruffly?
__________________
C.A.M.A.R.O- Constantly Adding Modifications Addiction Relentless Obsession 90% canadian 10% mexican 100% american muscle :flag2: |
|
07-29-2011, 05:59 AM | #6 | |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
Quote:
that might look really cool on a black car, i wanted to do these in matte black ,but until i get a piece of matte black the gloss will have to do. or maybe ill try the carbon fiber too
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
|
07-29-2011, 06:01 AM | #7 |
"To Punish And Enslave"
Drives: B E RS GBA #72541 3564 CC 220 CI Join Date: May 2011
Location: massachusetts
Posts: 3,889
|
i will prob end up doing it soon how hard was it to pop off the lights do they just "pop" off with alittle pressure or what i dont want to damage them lol
__________________
C.A.M.A.R.O- Constantly Adding Modifications Addiction Relentless Obsession 90% canadian 10% mexican 100% american muscle :flag2: |
07-29-2011, 06:04 AM | #8 | |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
Quote:
the fronts while slightly more time consuming are easy too. you have to take 3 allen screws out to let the fender well be pulled back so you can pop the tab, still a piece of cake then the socket just turns slightly to release it from the housing, be careful theres not much slack in the wires when you get them out! took me all of 10 min to pop all 4 out though.
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
|
07-29-2011, 06:08 AM | #9 | |
"To Punish And Enslave"
Drives: B E RS GBA #72541 3564 CC 220 CI Join Date: May 2011
Location: massachusetts
Posts: 3,889
|
Quote:
i mean i dont know too meny cars that even have side markers anymore its just for show and look hell dont even work as real turn singles i dont think so at least so i dont see a problum at all
__________________
C.A.M.A.R.O- Constantly Adding Modifications Addiction Relentless Obsession 90% canadian 10% mexican 100% american muscle :flag2: |
|
07-29-2011, 01:55 PM | #10 | |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
Quote:
all cars have to have side markers, and at least here in pa the fronts have to be orange and the rears have to be red, otherwise id change them both to orange to match my car
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
|
07-29-2011, 02:26 PM | #11 |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
its really too bad that im not good enough with the hobby knife to cut skulls outta the vinyl
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
07-29-2011, 03:09 PM | #12 | |
God Bless Dawson
Drives: Synergy for my Daughter Join Date: Feb 2010
Location: Texas
Posts: 3,057
|
Quote:
lol evil you are
__________________
|
|
07-29-2011, 03:31 PM | #13 |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
or if i could just find some type of punch that does different shapes i could make them cooler
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
07-29-2011, 03:33 PM | #14 |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
thank you naaa im not evil in the least, i just like wicked looking things
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SIDE MARKER, REVERSE LIGHT AND TAIL LIGHT TINT!!! | BLACK10 | Exterior Parts & Accessories | 561 | 11-18-2010 11:55 AM |
Clear side marker lights anyone? | topgun1 | Exterior Parts & Accessories | 7 | 07-25-2009 09:35 PM |
side marker lights | AntiVnm | Cosmetics and Lighting Modification Discussions | 14 | 07-20-2009 05:50 AM |